Roll Center Design and Explanation for a Street Stock
Dirt Race Life is explaining how to draw out the front end on a race car and determine where the roll center is. We also discuss where we want the roll center to be located and what to change to move the roll center. These are the key details needed when building a Street Stock Race car and setup on your car. Your hunt for dirt street stock race car tech videos are over. This is the detail you need to get to the front.
Видео Roll Center Design and Explanation for a Street Stock канала DIRT RACE LIFE
Видео Roll Center Design and Explanation for a Street Stock канала DIRT RACE LIFE
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Determine AntiDive Design and Use for Street Stock SetupInstalling Roll Cage Door Bars on your Street StockHow to Scale, Adjust, and Understand your Street Stock SetupNew Body For The Race Car!How to Prep Asphalt Pulloff Tires for a Street StockHow to Design and Build the Mounting for a Containment Seat and Belts in a race carThe Setup Show - Track BarsHand Painting A Race Car!CRUSA Street Stock Build Begins!Lower Control Arm Installation, How to correct the frame location, CRUSA Street Stock Build.How Much Does A Race Car Cost?Camaro Street Stock Race Review (Setup Changes, Driving, and Overall Analysis)How to Install Weight Jacks, CRUSA Street Stock Build.Front Geometry on. Super Late ModelThe Setup with Shane Tesch - Roll Center GeometryThe Gray Area With Brian Gray | Season 2 | Episode 1 | Bump SteerQuick Tips About 100 LBS Left Rear SpringAnti Dive and Anti Squat Explained - Rock Rods TechStock Car SetupHow to Install Upper Control Arm Mounts and a Street Stock