World Record DS9 EVO Drag Racing, Soldering and 60-Foot Time Importance | Today At HPA [UPDATE 236]
Record-breaking 4G63 powered EVO 'DS9', Rob Dahms AWD RX7, soldering and more. This is Andres update that came right before your members-only webinar lesson '236 | Drag Racing Data analysis’. Details on membership below.
GIVEAWAY LINKS:
Earnest: https://gleam.io/fb/iu6zR
EcuMaster giveaway has closed, but a MAHLE piston one is up and running: https://gleam.io/fb/OiNsK
Andre rounds off on the Rob Damn interview from SEMA, discusses the Instagram post on soldering from our Renvale UK trip, and also discusses the old DS9 project along with some comparisons between that EVO 9 and Andres old EVO 4, DOCILE, including overcoming some weight differences between the chassis.
Also discussed is the trap that people can fall into when it comes to trying to get as much power as possible from an engine as a show of skill and bragging rights, but it does come at a cost including making it difficult it to get a good 60-foot time which the importance of is outlined.
WEBINAR INFO: A pass down the drag strip can be over in just a few seconds and data logging is vital in order to be able to analyse and understand what happened and how to improve the car for the next pass. In this webinar we’ll discuss what you should be logging and how best to analyse this data in order to make sense of what you’re seeing, as well as how to decide how much power you can put to the drag strip.
Want to watch the members-only webinar on Drag Racing Data Analysis or Engine Failure Analysis along with over 220 other lessons on engine building, tuning, and wiring topics? Sign up here for only $19 USD a month, start and stop at any time (unlike your gym membership!).
Gold Membership subscription: http://bit.ly/GoldMembershipHPA
Website: https://www.hpacademy.com
Contact: support@hpacademy.com
Merch shop: http://bit.ly/MerchHPA
#highperformanceacademy #learntotune #ds9 #blastfromthepast #dragracing #evo9 #evo #4g63 #earnest #mahle
Видео World Record DS9 EVO Drag Racing, Soldering and 60-Foot Time Importance | Today At HPA [UPDATE 236] канала High Performance Academy
GIVEAWAY LINKS:
Earnest: https://gleam.io/fb/iu6zR
EcuMaster giveaway has closed, but a MAHLE piston one is up and running: https://gleam.io/fb/OiNsK
Andre rounds off on the Rob Damn interview from SEMA, discusses the Instagram post on soldering from our Renvale UK trip, and also discusses the old DS9 project along with some comparisons between that EVO 9 and Andres old EVO 4, DOCILE, including overcoming some weight differences between the chassis.
Also discussed is the trap that people can fall into when it comes to trying to get as much power as possible from an engine as a show of skill and bragging rights, but it does come at a cost including making it difficult it to get a good 60-foot time which the importance of is outlined.
WEBINAR INFO: A pass down the drag strip can be over in just a few seconds and data logging is vital in order to be able to analyse and understand what happened and how to improve the car for the next pass. In this webinar we’ll discuss what you should be logging and how best to analyse this data in order to make sense of what you’re seeing, as well as how to decide how much power you can put to the drag strip.
Want to watch the members-only webinar on Drag Racing Data Analysis or Engine Failure Analysis along with over 220 other lessons on engine building, tuning, and wiring topics? Sign up here for only $19 USD a month, start and stop at any time (unlike your gym membership!).
Gold Membership subscription: http://bit.ly/GoldMembershipHPA
Website: https://www.hpacademy.com
Contact: support@hpacademy.com
Merch shop: http://bit.ly/MerchHPA
#highperformanceacademy #learntotune #ds9 #blastfromthepast #dragracing #evo9 #evo #4g63 #earnest #mahle
Видео World Record DS9 EVO Drag Racing, Soldering and 60-Foot Time Importance | Today At HPA [UPDATE 236] канала High Performance Academy
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Tactrix OpenPort 2.0 & EcuFlash](https://i.ytimg.com/vi/y3ZPGoxxZxc/default.jpg)
![TRP Built Evo 8MR. 750HP, Emtron, Samsonas](https://i.ytimg.com/vi/o_a4rl1N7ew/default.jpg)
![How To Tune A Drag Car | Drag-Specific Tuning Secrets [GOLD WEBINAR LESSON]](https://i.ytimg.com/vi/0cxvL4pXQHA/default.jpg)
![ex-Worlds Fastest EVO Returns, 4G63 Build | Today At HPA [UPDATE 250]](https://i.ytimg.com/vi/KKn8nZlnj_g/default.jpg)
![[TECH TOUR] A 7-Second Quartermile WRX That Turns Corners... Fast](https://i.ytimg.com/vi/s4F1TTmiy58/default.jpg)
![🏅 Matt Galiano's 1000hp EVO X | HALTECH HEROES](https://i.ytimg.com/vi/81MXmiAI97Y/default.jpg)
![🤔 What's so special about 4G63? | TECHNICALLY SPEAKING](https://i.ytimg.com/vi/J7k95s0K-Kc/default.jpg)
![900HP 4 Door Turbo AWD Honda "The Ultimate Sleeper" V8 KILLER with a FULL SOUND SYSTEM!](https://i.ytimg.com/vi/iHi6Cg1OFoo/default.jpg)
![](https://i.ytimg.com/vi/-4WxukvZK4w/default.jpg)
![Some Exterior Mods for the Evo 8!](https://i.ytimg.com/vi/WtYIP553mU4/default.jpg)
![1970's Supercar Killing Sleeper | 8 Second 1JZ KE36 Corolla [TECH TOUR]](https://i.ytimg.com/vi/l-Ia7B4OgyA/default.jpg)
![Ilmor V8 IndyCar Powered Build Dreams, 3uz Plans AND A Honda S2000? | Today At HPA [UPDATE 235]](https://i.ytimg.com/vi/IZqf69emcjI/default.jpg)
![TX2K20 Day 3: Records CRUSHED in Roll Race Eliminations & Drag Race Qualifying](https://i.ytimg.com/vi/2dHqhLZRxQo/default.jpg)
![FLAWLESS 900HP 2.2L Nissan SR20 S15 | Time Attack Dreamboat [TECH TOUR]](https://i.ytimg.com/vi/1st9Ag-eRNg/default.jpg)
![How To Go From 500HP to 3000HP | VR38 GTR Engine Building [TECH TALK]](https://i.ytimg.com/vi/qjlGwj779jw/default.jpg)
![High Performance Manual Transmissions at the 2014 PRI Show](https://i.ytimg.com/vi/hRkoHWnEMAI/default.jpg)
![Record Tsukuba](https://i.ytimg.com/vi/Iej2U6Z4MMc/default.jpg)
![Change Wheels Faster With This One Simple Tool: Speedsocket](https://i.ytimg.com/vi/XRnQZYHkAZE/default.jpg)
![How Shane T became a tuner | Idle Chat - High Performance Academy](https://i.ytimg.com/vi/CII71uiG7EM/default.jpg)
![700lb-ft and 43PSI at 4,000RPM | 4G63 Head Cylinder Sealing Julian Godfrey [TECH TALK]](https://i.ytimg.com/vi/o3wGe2aU6SE/default.jpg)