Tenere 700 bearings kaputt replace. DIY workshop.

Pressure washer too hard, too close to the wheel hubs is not good for your bearings! I learned the hard way, You need to be careful, but if you need to replace the bearings, this is how I did it.
Also know that when your bearings break down, your ride is over, where ever you are.

For the rear wheel you have three bearings and two radial seals.
These are the dimensions.
rear wheel left.................28 x 58 x 16     62/28  2rs
rear wheel right..............20 x 47 x 14      6204 2rs
sprocket carrier..............20 x 42 x 12       6004 2rs
rear wheel left seal........40 x 58 x 7
rear wheel right seal.....28 x 47 x 7

You can buy them at any place that sells bearings. You can get a complete kit at your Tenere 700 shop, but I recommend getting bearings where you know you get quality stuff.
------------
#shootandride
Check out our t-shirts: https://shop.spreadshirt.se/nomadsweden/

Видео Tenere 700 bearings kaputt replace. DIY workshop. канала Nomad Sweden