Metropolis Firmware Update v1.30
Version 1.30 (May 16, 2017)
Major update.
Available at: https://intellijel.com/firmware-updates/
Chapters:
00:43 - Ratcheting
01:19 - Shortcut Keys
02:24 - Scale & Mode Shortcuts
02:57 - Pattern Memory
03:40 - Slide/Skip Toggle
04:01 - Reset Run Mode
04:51 - Tuning Mode
05:08 - 1V/Oct Aux Input Tracking
05:29 - 1V/Oct Calibration
Improvements to clocking and overall timing / performance
The AUX inputs can now track 1V per octave in P.Pre, P.PoST, and RooT modes. Config menu option added to calibrate them.
New aux destinations P.PreL P.PoSL and RooTL which work like the old ones used pre-1.30.
Ratcheting enabled by hold holding a stage button and turning the encoder.
TunE option in the CONFIG menu for assisting with tuning oscillators.
bSLId / bSKIP option in the CONFIG menu to toggle the default behaviour of the stage buttons between slide and skip.
rsT option in the CONFIG menu now has rST_r, “run” mode. In this mode the RESET input functions as a RUN input which is a gate input complimentary to the RUN output of the µMIDI. When the gate is high the sequencer runs. When the gate is low, it stops and resets.
Shortcut keys: Hold MODE, STAGES, STEP/DIV, SCALE, SWING or DIV and then press one of the stage buttons to quickly access commonly-used values.
Improved DINSync support.
Pattern saving, with 8 slots. Hold the SAVE button and click one of the stage buttons to save the current pattern. Hold The LOAD button and click one of the stage buttons to load a previously-saved pattern.
8 slots for global settings. In the SAVE and LOAD menus you can use the encoder to select a slot from 1-8 before clicking it to load and save the global settings.
Видео Metropolis Firmware Update v1.30 канала Intellijel
Major update.
Available at: https://intellijel.com/firmware-updates/
Chapters:
00:43 - Ratcheting
01:19 - Shortcut Keys
02:24 - Scale & Mode Shortcuts
02:57 - Pattern Memory
03:40 - Slide/Skip Toggle
04:01 - Reset Run Mode
04:51 - Tuning Mode
05:08 - 1V/Oct Aux Input Tracking
05:29 - 1V/Oct Calibration
Improvements to clocking and overall timing / performance
The AUX inputs can now track 1V per octave in P.Pre, P.PoST, and RooT modes. Config menu option added to calibrate them.
New aux destinations P.PreL P.PoSL and RooTL which work like the old ones used pre-1.30.
Ratcheting enabled by hold holding a stage button and turning the encoder.
TunE option in the CONFIG menu for assisting with tuning oscillators.
bSLId / bSKIP option in the CONFIG menu to toggle the default behaviour of the stage buttons between slide and skip.
rsT option in the CONFIG menu now has rST_r, “run” mode. In this mode the RESET input functions as a RUN input which is a gate input complimentary to the RUN output of the µMIDI. When the gate is high the sequencer runs. When the gate is low, it stops and resets.
Shortcut keys: Hold MODE, STAGES, STEP/DIV, SCALE, SWING or DIV and then press one of the stage buttons to quickly access commonly-used values.
Improved DINSync support.
Pattern saving, with 8 slots. Hold the SAVE button and click one of the stage buttons to save the current pattern. Hold The LOAD button and click one of the stage buttons to load a previously-saved pattern.
8 slots for global settings. In the SAVE and LOAD menus you can use the encoder to select a slot from 1-8 before clicking it to load and save the global settings.
Видео Metropolis Firmware Update v1.30 канала Intellijel
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Intellijel Audio IO 1U & JacksRubicon II sub warpIntellijel µMIDI Tutorial 2 - Connecting to AbletonNoise and MelodyVJ Clip demosPerforming Plonk's Presets With Planar 2Tetrapad: Chapter 4 - Custom Keyboard Modeintellijel audio io moduleIntellijel Cascadia - Hidden Function: The Entropic Sequence GeneratorQuadrax Link ModesPlanar FM IndexingTetrapad: Chapter 8 - Chord ModePlanar TrillsIntellijel µMIDI Tutorial 4 - Vel Mod & CCmetropolis demo 2Tetrapad: Chapter 9 - Custom Chord ModeMutamix Mixing Audio And CV WalkthroughPlanar 2 Effect PanningScales Weighs InPlanar Quadrature CVTetrapad: Chapter 6 - LFO Mode