How to change sway bar bushings BMW e46 1999-2005 \ DIY

This video is about how to replace stabilizer bar bushings on 3 Series BMW e46.
The sway bar in your vehicle connects both of the lower control arms together. During cornering, the wheel on the inside tends to want to roll under. The sway bar acts as a spring and keeps this from happening.
One of the most important connections in this system is the sway bar bushings. If they are soft or worn, some of that energy going to the other side is lost from too much sway bar flex or bushing give. To keep everything tight and responsive, it's best to replace your bushings.
Eliminates clunking, knocks, and bangs in the front and rear suspensions.

Sway Bar Bushing:
D=21,5MM PN: 31351094554
D=24MM PN: 31351094556
Sway Bar Link
PN:31356780847

Parts and tools you can buy here:
https://a.co/74qfUut
DISCLAIMER:
All the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All DIY projects entail some risk. It is the sole responsibility of the viewer to assume this risk. I'm not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Some of these are affiliate links, which means I receive a small percentage of sales/commission when you are shopping using my link. Thank you for your support!

Видео How to change sway bar bushings BMW e46 1999-2005 \ DIY канала Mike's Garage