Audi B5 2.7T Build | Getting them Valves Cleaned.
Due to the lockdown, I haven’t been able to create as much content as I hoped, but I’ve still managed to do a few things on the build.
With the heads cleaned up and ready to receive clean valves, I set about cleaning the soot off the exhaust valves and polishing up the intake valves.
The end goal for this build is to create a replica Audi B5 S4/RS4 as they were never brought into South Africa by Audi themselves.
Music used in this video:
DayFox & LiQWYD - Coming Home (Vlog No Copyright Music)
Syn Cole - Feel Good [NCS Release]
If you enjoyed this video, give it a like and please subscribe! If you have any questions or suggestions, feel free to comment below.
Видео Audi B5 2.7T Build | Getting them Valves Cleaned. канала That Sharlin
With the heads cleaned up and ready to receive clean valves, I set about cleaning the soot off the exhaust valves and polishing up the intake valves.
The end goal for this build is to create a replica Audi B5 S4/RS4 as they were never brought into South Africa by Audi themselves.
Music used in this video:
DayFox & LiQWYD - Coming Home (Vlog No Copyright Music)
Syn Cole - Feel Good [NCS Release]
If you enjoyed this video, give it a like and please subscribe! If you have any questions or suggestions, feel free to comment below.
Видео Audi B5 2.7T Build | Getting them Valves Cleaned. канала That Sharlin
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Audi B5 2.7T Build | Rear Brake Disc Install and Even More Cleaning...](https://i.ytimg.com/vi/pv056Ak1k4I/default.jpg)
![Audi B5 2.7T Build | Dashboard Work and Cleaning.](https://i.ytimg.com/vi/WllaPbkqRb0/default.jpg)
![Audi B5 2.7T Build | Engine walkabout & Wiring in the Engine Bay.](https://i.ytimg.com/vi/7remhJPXx_M/default.jpg)
![Audi B5 2.7T Build | The Revival of The B5 2.7T Swap.](https://i.ytimg.com/vi/KsKK1yZng1c/default.jpg)
![Audi B5 2.7T Build | Installing the Bearing Shells and Crank into the 2.7T Block.](https://i.ytimg.com/vi/8CSLxQWcCvY/default.jpg)
![Audi B5 2.7T Build | Marrying the 2.7T Pistons and Conrods.](https://i.ytimg.com/vi/9tkFAlSba7I/default.jpg)
![Audi B5 2.7T Build | Gapping the Rings (Cont.) and Installing them on the 2.7T Pistons.](https://i.ytimg.com/vi/2LE_qgj9TJw/default.jpg)
![Audi B5 2.7T Build | Porting out the 2.7t Intake Manifold and gapping the Rings.](https://i.ytimg.com/vi/ZQGdAJQEvMc/default.jpg)
![Audi B5 2.7T Build | Assembling the 2.8 Heads and the 2.7T Block](https://i.ytimg.com/vi/20YbkvMRyIk/default.jpg)
![Audi B5 2.7T Build | The 2.8 Heads Get Smoothed…](https://i.ytimg.com/vi/THzPeZwOVjU/default.jpg)
![Audi B5 2.7T Build | My 2.7T Parts Have Arrived!!!](https://i.ytimg.com/vi/oN8QCNmu-LE/default.jpg)
![Audi B5 2.7T Build | New Parts, Getting the Block Back and More Cleanup.](https://i.ytimg.com/vi/r8AcRA0Qyd8/default.jpg)
![Audi B5 2.7T Build | The 2.8 Drivetrain Removal.](https://i.ytimg.com/vi/BZ_9bbKvkq0/default.jpg)
![Audi B5 2.7T Build | Honing the Bores.](https://i.ytimg.com/vi/6ZoZ0z2JvkM/default.jpg)
![Audi B5 2.7T Build | Cleaning the Cam Caps and Tappet Covers!](https://i.ytimg.com/vi/-s_PptTuz24/default.jpg)
![Audi B5 2.7T Build | Ripping apart the heads.](https://i.ytimg.com/vi/0idb6F2QHQo/default.jpg)
![Audi B5 2.7T Build | Stripping, Cleaning and Reassembling the Turbo's.](https://i.ytimg.com/vi/Tgyxe0KbqQo/default.jpg)
![Audi B5 2.7T Build | Cleaning Pistons and Stripping Turbo's!](https://i.ytimg.com/vi/zMHA1ArPqmo/default.jpg)
![Audi B5 2.7T Build | Conrods and Pistons come apart.](https://i.ytimg.com/vi/osnzqqkZdug/default.jpg)
![Audi B5 2.7T Build | Rings and Bearings Galore!](https://i.ytimg.com/vi/8c8dru3W4tg/default.jpg)