How to Remove Steer Angle Sensor 12-18 Nissan Versa
1A Auto shows you how to remove, install, change or replace a failed steer angle sensor. This video is applicable to the 12, 13, 14, 15, 16, 17, 18 Nissan Versa.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oamZ/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/oamZ/1AXAA00013
• 10mm Socket http://1aau.to/oYM/1AXAA00017
• 15mm Socket http://1aau.to/o73/1AXAA00015
• 19mm Socket http://1aau.to/osx/1AXAA00043
• Ratchet http://1aau.to/oaos/1AXAA00016
• Socket Extensions http://1aau.to/o73/1AXAA00015
• Torque Wrench http://1aau.to/owv/1AXAA00044
• Painter's Tape
For More Info visit us at http://1aau.to/h/bnD/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Видео How to Remove Steer Angle Sensor 12-18 Nissan Versa канала 1A Auto: Repair Tips & Secrets Only Mechanics Know
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oamZ/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/oamZ/1AXAA00013
• 10mm Socket http://1aau.to/oYM/1AXAA00017
• 15mm Socket http://1aau.to/o73/1AXAA00015
• 19mm Socket http://1aau.to/osx/1AXAA00043
• Ratchet http://1aau.to/oaos/1AXAA00016
• Socket Extensions http://1aau.to/o73/1AXAA00015
• Torque Wrench http://1aau.to/owv/1AXAA00044
• Painter's Tape
For More Info visit us at http://1aau.to/h/bnD/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Видео How to Remove Steer Angle Sensor 12-18 Nissan Versa канала 1A Auto: Repair Tips & Secrets Only Mechanics Know
Показать
Комментарии отсутствуют
Информация о видео
1 октября 2018 г. 19:08:30
00:17:47
Другие видео канала
2 Signs of a bad Steering Angle Sensor failing Symptoms needs calibrationSteering Angle Sensor Voltage HighInfiniti G35 Spiral Cable (Clock Spring) Replacement and VDC OFF SLIP Light ResetP0101 Very Important and cheap repair, 2013-2016 Nissan AltimaGM GDI RICH codes P0172 P0175 (Diag & Repair)steering angle sensor, Centrar sensor ángulo dirección, Nissan X-trail CON SCANNER CARMAN SCAN LITE,замена подрулевого шлейфа,моргает значок подушки на приборке,устранение неисправности,ниссан кашкайVDC and Slip Light On Infiniti QX56 | Steering Angle SensorNissan C1130 C1132 Engine Signal Fault Codes Explained & Fixed Traction LightsHow to do an alignment on a car at home using only a tape-measure!!! (And Alignment Basics)falla en dirección asistida Nissan versa ( corrige falla sin scaner2007-2012 Nissan Versa Grille and Front Bumper Cover RemovalCómo Reparar Problema Sensor de Par de la Dirección Asistida Electrica EPS de un Opel Corsa B62TE Solenoid Pack Pin IDNissan Clock Spring What You Need to KnowHow To Replace a Clock Spring in a Nissan Truck/SUVNissan key Light flashing No Start Sure Fix!Launch | Nissan Rogue: Steering Angle Reset and G Sensor CalibrationVDC activo por sensor de ángulo, Nissan Sentra 2011