Synchro driver new design testing - will it work?

Testing for the first time with real gauges the latest iteration of the Static Synchro Driver board!

First, apologize for the video quality and the bad auto-focus. Obviously my cellphone is not upto the game anymore xD.
Second, I realize how bad my speech is when recording a video, I really don't know how to speak alone xD.

Anyways hopefully it will get better at certain point.

About the board:
Provides 10 fully independent, high resolution, wide voltage range, configurable outputs.
Each output can be configured as:
- Simple analog output
- Synchro excitation output (400Hz sinusoidal signal with configurable voltage)
- Synchro driver for 2 phase synchros
- Synchro driver for 3 phase synchros
Once the functionality is setup, then is as simple as sending a angle/value as float number, and the board will do the rest!

This hardware iteration includes Ethernet connection and full TCP, UDP stack. The FW also implements a DHCP client.

Software wise, I did a python module to talk with the board (which I will make opensource) which facilitates the testing, but also makes the mapping/binding with the sim much easier.
Anyways C++ and C APIs are also possible.

Видео Synchro driver new design testing - will it work? канала Lucas Matías Angarola