Miata Coil on Plug DIY - Full HowTo!

Coil on Plugs are easy to do on your Miata. If you need a stronger spark for boost or hate replacing plug wires over and over again, then COPs are for you. In this How To we take you through what to get, how to set up the bracket, and how to wire a full plug and play harness.

If you have a 90-93 Miata, everything is similar but you'll need to connect to your igniter plug.

Shopping list:
Toyota Coil on Plugs 90080-19015, Qty 4 (made for many Toyota/Lexus cars from 2000 on, used is fine - $50) If you buy new, get the real Denso (OEM) version not one of the many knockoffs: https://amzn.to/2YgLWoY
4 pin coil connector pigtails, Qty 4 - $10-12 from Amazon: https://amzn.to/2Ycg7xe
16 gauge AWG wire (assorted colors): https://amzn.to/2XtlSJN
For '94+ Miatas, PNP connector to car's harness - https://bit.ly/2DaD6C7

Bracket (Hardware store):
1.5 inch by 16 inches aluminum flat bar, 1/8 inch thick
M6-1.0 x 40mm flat head machine screw, Qty 4
M6-1.0 nylon lock nut, Qty 4
M6-1.0 cap nut, Qty 4

Tools used:
Drill
Countersink drill bit, 5mm or 3/8 inch
1 inch bi-metal hole saw: https://amzn.to/2Yag5WX
1/4 inch drill bit
10mm socket
Phillips head screwdriver
ratchet
soldering iron: https://amzn.to/2YeasXM
60/40 rosin core solder: https://amzn.to/2Ft5BKU
heat shrink tubing: https://amzn.to/2X4lX7j
3M Super 88 electrical tape: https://amzn.to/2Xzlycs
Loom wrap, 1/4": https://amzn.to/2Xudc6c
Loom wrap, 3/8": https://amzn.to/2N85tGJ

OGPedxing is all about DIY, gadgets, and tools. #Miata #NAMiata

Видео Miata Coil on Plug DIY - Full HowTo! канала OGPedXing