Toyota 2d Back Shock & Wheel Hub Change By Raja Auto

Toyota 2d Back Shock & Wheel Hub Change By Raja Auto
toyota 2d saloon 2008,
toyota 2d saloon,
toyota 2d saloon 2007,
toyota hilux back cabin,

Changing the rear shocks and wheel hubs on a Toyota 2D (presumably a 2-door model like a coupe) can be a bit involved, but it's manageable with the right tools and some mechanical know-how. Here are the general steps to replace the rear shocks and wheel hubs on your Toyota:

Tools and Materials Needed:
1. Jack and jack stands or ramps
2. Lug wrench or socket set
3. Breaker bar or torque wrench
4. Wheel chocks
5. Jack stands
6. Replacement rear shocks
7. Replacement wheel hubs (if necessary)
8. New wheel hub bolts (if necessary)
9. A torque wrench
10. Penetrating oil (e.g., WD-40)
11. Pry bar or large screwdriver
12. Hammer
13. Brake cleaner
14. Anti-seize compound
15. Wheel bearing grease
16. Safety goggles and gloves

Steps:

1. Safety Precautions:
- Ensure the vehicle is on a level surface and the parking brake is engaged.
- Use wheel chocks to secure the front wheels to prevent the car from rolling.

2. Raise the Rear of the Vehicle:
- Use a jack and jack stands to lift and secure the rear of the vehicle.

3. Remove the Rear Wheels:
- Use a lug wrench or socket set to remove the rear wheels.

4. Access the Shock Absorbers:
- Locate the rear shocks, which are typically attached to the suspension and the body of the vehicle.
- You may need to remove interior trim or access panels in the trunk to access the upper shock mounts.

5. Remove the Shocks:
- Use a breaker bar or torque wrench to loosen and remove the bolts securing the shocks to the suspension and the vehicle's body.
- Carefully remove the old shocks.

6. Install New Shocks:
- Attach the new shocks and tighten the bolts to the manufacturer's specifications using a torque wrench.

7. Access the Wheel Hubs:
- To access the wheel hubs, you may need to remove the brake caliper, rotor, and possibly the axle nut.
- Refer to your vehicle's service manual for specific instructions on accessing and replacing the wheel hubs.

8. Remove the Wheel Hub Assembly:
- Depending on your specific model, you may need to remove bolts or nuts securing the wheel hub assembly.
- Use penetrating oil to help loosen rusted or stuck components.
- Carefully use a pry bar or a large screwdriver to remove the hub assembly.
- If necessary, tap it gently with a hammer to free it from the knuckle.

9. Install the New Wheel Hub Assembly:
- Clean the mounting surface and apply a thin layer of anti-seize compound to prevent future corrosion.
- Carefully install the new wheel hub assembly and tighten the bolts or nuts to the manufacturer's specifications using a torque wrench.
- If applicable, install a new axle nut and tighten it to the correct torque value.

10. Reassemble the Brake Components:
- Reinstall the brake rotor and caliper, following your vehicle's service manual for proper procedures.
- Lubricate the brake caliper slide pins with brake grease.

11. Reinstall the Rear Wheels:
- Mount the rear wheels and hand-tighten the lug nuts.

12. Lower the Vehicle:
- Carefully lower the vehicle to the ground using the jack.

13. Tighten the Lug Nuts:
- Use a torque wrench to tighten the lug nuts to the manufacturer's recommended torque specifications.

14. Check for Leaks and Proper Operation:
- Inspect the areas where you worked for any signs of leaks, and make sure the rear wheels spin freely without any unusual noise or resistance.

15. Test Drive:
- Take your vehicle for a test drive to ensure that the shocks and wheel hubs are functioning properly.

Always refer to your specific vehicle's service manual for detailed instructions and torque specifications, as they may vary depending on the make and model of your Toyota. If you're not confident in your mechanical abilities, consider seeking professional assistance or guidance. Additionally, be sure to replace any worn or damaged components as necessary, and prioritize safety throughout the entire process.

Видео Toyota 2d Back Shock & Wheel Hub Change By Raja Auto канала Raja Auto