Today we have a special day, when we finally to see our boat on the water.
This is technical launch, during which, we want to check how our boat stands on the water. If there is any wrong heeling or trim of the hull. We find out that, that boat stands perfect on water surface, no heeling and no trim. Inside the boat, in the cockpit, we have 300 kilo in sand bags that imitate weight of the engine and fuel. So, the boat close to real condition when engine is on board. We are very happy, and in the next week, we will send the boat to our customer in Germany. We look forward to build a second hull.
Видео Today we have a special day, when we finally to see our boat on the water. канала Boatbuilding
Видео Today we have a special day, when we finally to see our boat on the water. канала Boatbuilding
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![The skipper seat and engine controller / Сиденье шкипера и контроллер двигателя](https://i.ytimg.com/vi/GIt4QtbJnPU/default.jpg)
![We started to cut aluminum for first hullof long expected power boat Teknomar 007](https://i.ytimg.com/vi/p8ABiHvImRc/default.jpg)
![M-750#1 latest welding job.](https://i.ytimg.com/vi/bDDkJSLCLQY/default.jpg)
![Land Craft C5 hull#1 a prototype nearly completion.](https://i.ytimg.com/vi/ir4-UalyYZ0/default.jpg)
![Side joint and internal stiffener structure of TEKNOMAR 777 CABIN](https://i.ytimg.com/vi/Jh4y8iDfjMs/default.jpg)
![Very nice option, electric hatch Webasto on power boat Ventum 750.](https://i.ytimg.com/vi/hqitcrtSE4E/default.jpg)
![Силовой набор полностью собран, установлены днищевые листы, начаты обваркакиля и установка скул.](https://i.ytimg.com/vi/zKiYSDclyCg/default.jpg)
![Land Craft X5 - ходовые испытания рабочего катера (корпус №1)](https://i.ytimg.com/vi/GiL0rTtxc84/default.jpg)
![Land Craft C6#4 continuous of welding job on superstructure. Obviously quality on hull#4 is growing.](https://i.ytimg.com/vi/yr3bi1bLjWg/default.jpg)
![Our craftsman is our treasure! We really respect their work!](https://i.ytimg.com/vi/s9KFiIrRzQY/default.jpg)
![The final cleaning before delivering](https://i.ytimg.com/vi/7QsAA-oVkqU/default.jpg)
![Navitek 20 is almost ready for delivery. We welding windshield frame and handrails around console.](https://i.ytimg.com/vi/ZJ2VmHd2uqg/default.jpg)
![Mariner 777 superstructure finally welded to the hull. This boat looks stunning!](https://i.ytimg.com/vi/N1Zb5TgmpK0/default.jpg)
![Short update for Teknomar 007 building progress.](https://i.ytimg.com/vi/3bsJ-9Kgzw8/default.jpg)
![The final welding of the hull TEKNOMAR 777 Cabin](https://i.ytimg.com/vi/WRBmI0KyVnk/default.jpg)
![Welders very careful working on structure of M-750 hull#1.](https://i.ytimg.com/vi/CNYoeRwH9uc/default.jpg)
![Order for a small RIB 4.5 m. | Заказ на небольшой RIB 4.5 m](https://i.ytimg.com/vi/zZginQcXCDQ/default.jpg)
![Power boats M 550 are ready to shipment in Finland](https://i.ytimg.com/vi/jZL_-gEHIBA/default.jpg)
![Teknomar 007 new back door in assemblin procedure.](https://i.ytimg.com/vi/4IoaP6JIm7U/default.jpg)
![Ventum 750#11 beginning of superstructure welding.](https://i.ytimg.com/vi/0fPRViWSY4c/default.jpg)
![Закончены работы по обварке внешних швов, приварены реданы.](https://i.ytimg.com/vi/LUzve0-ZEqI/default.jpg)