SVMC 120 Profile Machining and V Type Cutting Center - Schtec Machine
Standard Features;
- Infeed magazine, 11 pieces can be loaded on the machine. (Max. length 6.5 m)
- Simultaneous optimization on the machine allows the machine to self-optimize on the waste
profiles, this can be switch between FDS control and machine control.
- Height and width detection to ensure correct profile is loaded.
- New design of loading station allows profiles to be loaded simultaneously, this feature
increase the efficiency of profile changeovers.
- The 4-axis routing portal comprises of 11 high speed routing motors utilising 5mm & 8mm
cutters at 0 ,90, 180 & 270 degrees plus 3, servo-driven angle router motors with 5mm
cutters for multiple profile suites with different rebate drainage angles.
- This allows the SVMC120 to produce all preps in PVC profiles such as drainage, spot marking,
euro-cylinder holes, night vents, hinge holes, handle holes, euro groove routing etc.
- Highley efficient simultaneous routing operations on 4-axis routing portal, allowing
machining from the top and bottom concurrently for door handles and night vents etc.
- All angles between 30 - 150 degrees are cut with 0.1 degree accuracy with servo axis
controlled 500 mm diameter saw.
- Newly designed double clamping system to stabilise both the bevel and rebate with
individual clamps and profile specific software controlled variable clamping pressures on
each of the 4 sawing clamps.
-Software controlled transom support for Z & T profiles
- Private HMI software developed by Schtec Software Department allows different kinds of
window design program data files to be uploaded on machine, fully compatible with
established UK software BM and First Degree.
- All alarms and machine faults are displayed on HMI along with solutions.
- 15” Touch Screen and high-performance industrial PC with Windows Embedded system.
- Industrial PC Based Servo Control System (Beckhoff)
- Online diagnostic and troubleshooting via user friendly interface.
- File transfer by USB or ethernet network and remote desktop connection by Wi-Fi or
Ethernet connection
- Central lubrication system reduces the time spent for maintenance.
- Scrap conveyor under saw and extraction ports on all saw blade cowls.
- Capacity 100-110 frames per 8 hour shift depending on complexity (timings based on 14
piece top over fixed next to a side light) Approximately 1 piece every 18.6 seconds
Видео SVMC 120 Profile Machining and V Type Cutting Center - Schtec Machine канала Schtec Makine San. ve Tic. A.Ş.
- Infeed magazine, 11 pieces can be loaded on the machine. (Max. length 6.5 m)
- Simultaneous optimization on the machine allows the machine to self-optimize on the waste
profiles, this can be switch between FDS control and machine control.
- Height and width detection to ensure correct profile is loaded.
- New design of loading station allows profiles to be loaded simultaneously, this feature
increase the efficiency of profile changeovers.
- The 4-axis routing portal comprises of 11 high speed routing motors utilising 5mm & 8mm
cutters at 0 ,90, 180 & 270 degrees plus 3, servo-driven angle router motors with 5mm
cutters for multiple profile suites with different rebate drainage angles.
- This allows the SVMC120 to produce all preps in PVC profiles such as drainage, spot marking,
euro-cylinder holes, night vents, hinge holes, handle holes, euro groove routing etc.
- Highley efficient simultaneous routing operations on 4-axis routing portal, allowing
machining from the top and bottom concurrently for door handles and night vents etc.
- All angles between 30 - 150 degrees are cut with 0.1 degree accuracy with servo axis
controlled 500 mm diameter saw.
- Newly designed double clamping system to stabilise both the bevel and rebate with
individual clamps and profile specific software controlled variable clamping pressures on
each of the 4 sawing clamps.
-Software controlled transom support for Z & T profiles
- Private HMI software developed by Schtec Software Department allows different kinds of
window design program data files to be uploaded on machine, fully compatible with
established UK software BM and First Degree.
- All alarms and machine faults are displayed on HMI along with solutions.
- 15” Touch Screen and high-performance industrial PC with Windows Embedded system.
- Industrial PC Based Servo Control System (Beckhoff)
- Online diagnostic and troubleshooting via user friendly interface.
- File transfer by USB or ethernet network and remote desktop connection by Wi-Fi or
Ethernet connection
- Central lubrication system reduces the time spent for maintenance.
- Scrap conveyor under saw and extraction ports on all saw blade cowls.
- Capacity 100-110 frames per 8 hour shift depending on complexity (timings based on 14
piece top over fixed next to a side light) Approximately 1 piece every 18.6 seconds
Видео SVMC 120 Profile Machining and V Type Cutting Center - Schtec Machine канала Schtec Makine San. ve Tic. A.Ş.
Показать
Комментарии отсутствуют
Информация о видео
15 апреля 2024 г. 14:53:04
00:04:13
Другие видео канала
![SG 110 Glazing Bead Saw + MA 270 + MD 272 and GA 300 Glass Assembly for PVC](https://i.ytimg.com/vi/2S8nMa5g_oU/default.jpg)
![RC 210 Copy Router Machine with the Triple Drill for PVC and Aluminium](https://i.ytimg.com/vi/puQw0Rc9c9A/default.jpg)
![WD 710 Single Head Welding Machine SCHTEC Makine](https://i.ytimg.com/vi/THn7fsmumuU/default.jpg)
![SCHTEC - 2024 Fensterbau Frontale](https://i.ytimg.com/vi/TC_5D8-YrBU/default.jpg)
![SCHTEC Eurasia Window, Door & Glass Exhibition 2020 TUYAP - EXPO ISTANBUL](https://i.ytimg.com/vi/tIyBKLPkyqE/default.jpg)
![SMC 360 Profile Machining and Cutting Center for PVC - Schtec Machine](https://i.ytimg.com/vi/ampFoxdCkds/default.jpg)
![SCHTEC Eurasia Window, Door & Glass Exhibition 2023 TUYAP - EXPO ISTANBUL](https://i.ytimg.com/vi/vXzVjx39K3U/default.jpg)
![RS 171 Vertical Reinforcement Steel Screwing Machine SCHTEC Makine](https://i.ytimg.com/vi/HKumvmKVDOc/default.jpg)
![SSL1/SP Fully Automated Four Head Welding and CNC Corner Cleaning Line - Schtec Machine](https://i.ytimg.com/vi/Urk9mMpZ7D0/default.jpg)
![SCHTEC Eurasia Window, Door & Glass Exhibition 2022 TUYAP - EXPO ISTANBUL](https://i.ytimg.com/vi/CtSWy3LPWtA/default.jpg)
![WS 220 Automatic Triple Water Slot Router for PVC - Schtec Machine](https://i.ytimg.com/vi/27Jwl9X0H_Y/default.jpg)
![SCHTEC PVC ve ALÜMİNYUM PROFİL İŞLEME MAKİNELERİ AVRASYA KAPI PENCERE CAM FUARI 2022](https://i.ytimg.com/vi/7VjlAfD_Ck8/default.jpg)
![MT 250 Automatic End Milling Machine SCHTEC Makine](https://i.ytimg.com/vi/o4ti-WDj5t0/default.jpg)
![RS 171 Vertical Steel Screwing Machine](https://i.ytimg.com/vi/sPVvvJ2XTBE/default.jpg)
![SCHTEC Eurasia Window, Door & Glass Exhibition 2021 TUYAP - EXPO ISTANBUL](https://i.ytimg.com/vi/JkxE1Z9MwlI/default.jpg)
![DCA 440 Servo Controlled Automatic Double Head Aluminum Cutting Machine SCHTEC Makine](https://i.ytimg.com/vi/QgRxZbEQVqg/default.jpg)
![CM 620 CNC Corner Cleaning Machine for PVC - SCHTEC Makine](https://i.ytimg.com/vi/8qEMzr5wzqk/default.jpg)
![WD 720 Double Head Welding Machine SCHTEC Makine](https://i.ytimg.com/vi/VWboXbH4P68/default.jpg)
![SD 140 Automatic Double Head Cutting Machine SCHTEC Makine](https://i.ytimg.com/vi/EbrCjnKkP8w/default.jpg)
![Schtec - Bloomberg HT - Çıkış Yolu Ropörtajı Ertuğrul ÇAMAĞAÇ](https://i.ytimg.com/vi/eicR1987KD0/default.jpg)