EPIRB-AIS & AIS-SART Test | GMDSS Beacon Test with Futronic

📡 Futronic MKII Test Box – EPIRB-AIS & AIS-SART Beacon Test Guide

Welcome to the Danphone A/S video series for the Futronic MKII Test Box! In this video, we demonstrate how to perform a beacon test on EPIRB-AIS and AIS-SART devices using the Futronic MKII — a professional GMDSS and AIS test solution.

🔍 What You will Learn in This Video:
✔️ How to activate and test EPIRB-AIS and AIS-SART beacons
✔️ Viewing and verifying AIS messages received via the test box
✔️ Reading and interpreting test results on the display

Timestamps:
00:00 - Introduction
00:09 - Menu tree guide
00:40 - Setup
00:57 - Beacon test
01:18 - Outro

📌 Important Notice:
This video is for guidance only – always refer to the latest official manual from Danphone A/S. Beacon tests must be performed by qualified technical personnel only.
Always comply with national and international regulations during AIS signal tests.

📖 Download the latest manual: https://www.danphone.com/downloads/futronic-mkii/
📧 Contact Support: support@danphone.com
🌐 Visit Website: https://www.danphone.com

🎬 Watch the full video series here: https://www.youtube.com/watch?v=zIw6jPipCFY&list=PL5co3cBj5h5FWe4YdILz_qqU4m-GagL-A&ab_channel=DanphoneA%2FS

🔔 Subscribe for updates and leave a comment below if you have any questions!
#gmdss #Futronic #maritimesafety #EPIRBAIS

Видео EPIRB-AIS & AIS-SART Test | GMDSS Beacon Test with Futronic канала Danphone A/S