How to Make a powerful Screwdriver/Drill using DC 12V 300RPM Motor

Required Materials:

1. High Torque Gear motor 12v 300rpm RS550 - https://bit.ly/2WFbSig
2. B10 Drill Chuck 0.6mm-6mm - https://bit.ly/3oCsEKu
3. 12V Switch On/Off - https://bit.ly/2ZMo16b
4. 3 position 2 pole switch - https://bit.ly/2YfwiyQ
5. 1/4 Inch Hex Shank Drill Bit Angle Driver - https://bit.ly/3uFkuSF
6. 40mm PVC Pipe
7. 40mm PVC T-Joint x1
8. M3 Screws x6 - https://bit.ly/3a6b4pE
9. M3 Screw Washers x6 - https://bit.ly/3a6b4pE
10. DC Power Connector - https://bit.ly/3ov6AS4

Minleaf 96W 12V-24V Power Supply Adapter - https://youtu.be/6AW7Fqy0vGo

Subscribe LahisTech: https://bit.ly/2JHtlyc
Subscribe for more future creative project videos.
Thank you.

Видео How to Make a powerful Screwdriver/Drill using DC 12V 300RPM Motor канала LahisTech