HowTo: Build Seat Occupancy Bypass BMW Cheap

**CLICK HERE: To see how to install the bypass.
https://www.youtube.com/watch?v=LEGgps56lAE

If you find are having a problem where your BMW is showing an "airbag" or "restraint System failure" warning light for no apparent reason, it can more often than not be due to a faulty occupancy sensor in the passenger seat.
This sensors job is to tell the car that there is a passenger sitting in the seat so in the event of an accident, the car knows to fire the passenger airbag. The mat sensor is a very common problem in many BMW models and can be damaged from something as simple as kneeling on the passenger seat. You can have the seat sensor replaced entirely by a dealer but this requires the seat to be removed from the car, stripped of its upholstery and can cost as much as €600 as it takes a few hours to complete.
This little mod is a very simple one that mimics the values sent back to the car by the original seat sensor when in good working order, so the car will always assume there is a passenger sitting there and will fire that airbag if the situation arises. If the warning you are having is intermittent then you most likely wont have to visit a dealer to have it reset afterwards. If the airbag warning is always on then you will have to have it reset afterwards. You shouldnt need to spend any more than a couple of euro for the parts to do this mod, My own cost 4-5 quid and i have enough to do about 50 bypass rigs.

Hope you find this useful and feel free to have a look through my channel for more useful/funny/weird video's. :)

Видео HowTo: Build Seat Occupancy Bypass BMW Cheap канала Cpt MishMash VonRandom