How to test Accumax Solenoids while still in the lowrider
In this video i show you guys how to test the solenoids while they are still in the ride. As a PRECAUTION disconnect the wire that goes to the pump from the solenoids. One thing i did forget to mention is if you come across a bad solenoid then you can't test the next solenoid unless you disconnect the wire from the solenoids that comes from the batteries and place it on the coupling/wire thats connected to the next solenoid that your trying to test.
Thanks for watching, please subscribe if you haven't and keep lowridin"
Видео How to test Accumax Solenoids while still in the lowrider канала LowLows & More!
Thanks for watching, please subscribe if you haven't and keep lowridin"
Видео How to test Accumax Solenoids while still in the lowrider канала LowLows & More!
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Quick Tip for a cleaner looking trunk](https://i.ytimg.com/vi/aKsODGMJwk8/default.jpg)
![Majestics Portland Hop](https://i.ytimg.com/vi/c85RQdeCSFU/default.jpg)
![Wrapping a Frame step 4 and 5](https://i.ytimg.com/vi/gA5yy8KzTrs/default.jpg)
![Finishing up the hopper and built the drive shaft with a Slip Yoke](https://i.ytimg.com/vi/ZTqxFjBnWW8/default.jpg)
![Step? Continuing on the Hopper Build!](https://i.ytimg.com/vi/yUMc4J-lIW8/default.jpg)
![Preview of the Buick Skylark Lowrider project](https://i.ytimg.com/vi/LgK4FGUAIec/default.jpg)
![continue on Wrapping a Frame](https://i.ytimg.com/vi/kE3fHuxOMkI/default.jpg)
![Finished Rack and re-wired the switches on the Skylark Lowrider](https://i.ytimg.com/vi/4yvcTEcTdzI/default.jpg)
![Plans for my Lowrider Truck for summer 2018 & my Car Show!](https://i.ytimg.com/vi/7L4yOewokKA/default.jpg)
![Working on a G-Body Axle and some clips of my car show](https://i.ytimg.com/vi/leUbukzs_Jk/default.jpg)
![Beginning of wrapping a Frame](https://i.ytimg.com/vi/yv8ThaaBkNw/default.jpg)
![Swapping upper trailing arms on the 77 monte carlo lowrider](https://i.ytimg.com/vi/t001bo6Zqv4/default.jpg)
![Some work on Skylark and reinforce lower trailling arms](https://i.ytimg.com/vi/zM_-m_Jtmo8/default.jpg)
![Lay & Play Lowrider build Part 4](https://i.ytimg.com/vi/6Y8UqO5iGgw/default.jpg)
![Installing the rear cylinders on the caddy, bad day](https://i.ytimg.com/vi/3N9dDqBBs8s/default.jpg)
![Finishing the Skylark Lowrider](https://i.ytimg.com/vi/-p01mtjoJj0/default.jpg)
![Reinforcing Chevy Caprice Axle](https://i.ytimg.com/vi/PnoOPSNHV60/default.jpg)
![Pumps for the 77 Monte Carlo](https://i.ytimg.com/vi/PoUuAQCs67w/default.jpg)
![Battery Rack for the Buick Skylark](https://i.ytimg.com/vi/Z5AkKMjukH8/default.jpg)
![Practicing on the switch *weak*](https://i.ytimg.com/vi/NizRWKgYJ1o/default.jpg)