How to Make a Wooden Desktop Sign using Walnut Plywood, Glitter Acrylic and a GlowForge Basic
No Place Like Home Sign
In this video, I make a 'No Place Like Home' desktop sign inspired by the Wizard of Oz. The final physical product can be viewed at: https://www.etsy.com/listing/1024863419/theres-no-place-like-home-desktop-sign.
The back and base are made of 1/4" walnut plywood and the letters are glitter acrylic. I use masking to help prevent charring on the wood and tried a dish soap method to coat the acrylic which also prevented a dull finish. On the back of the acrylic, I use a 3M double-sided adhesive which let me stick the letters onto the sign without dealing with glue.
The bottom base slot is 7.85" x .2097" and the sign is between .21" and .23" in depth. Depending on how tight I use the calipers. The width of the sign is 7.85. Somehow this works for me so the sign slips into the base.
Please let me know if you have any questions!
Materials Used for this Project
(Note, those with an (A) behind them are affiliate links which means I might be able to get a small percentage back with no additional cost to you.)
GlowForge – My referral link gets you $300 off the Plus or $500 of the Pro! https://glowforge.us/f/UHJTTYKB
¼” Walnut Plywood Board – https://ocoochhardwoods.com/scroll-saw-lumber/walnut/
1/8” (3mm) Red Glitter Acrylic - https://houstonacrylic.com/collections/glitter-acrylic/products/1-8-0-118-3-0mm-red-glitter-12-x-20-sheet
1/8” (3mm) Silver Glitter Acrylic - https://houstonacrylic.com/collections/glitter-acrylic/products/1-8-0-118-3-0mm-silver-glitter-12-x-20-sheet
Deco Premium Silver Oil Pen (A): https://amzn.to/3hbZRHy
Magnets used to mark edges (A): https://amzn.to/3jlEg1Z
3M Double-sided Adhesive (A): https://amzn.to/3y3H3B6
Masking for Vinyl (A): https://amzn.to/3hfwJPx
Mineral Oil (A): https://amzn.to/3y15eQv
Polyacrylic (A): https://amzn.to/3A7ZbM0
Foam Brushes (A): https://amzn.to/3A5y7g9
Видео How to Make a Wooden Desktop Sign using Walnut Plywood, Glitter Acrylic and a GlowForge Basic канала Hello Fairytale by Nicole Heath
In this video, I make a 'No Place Like Home' desktop sign inspired by the Wizard of Oz. The final physical product can be viewed at: https://www.etsy.com/listing/1024863419/theres-no-place-like-home-desktop-sign.
The back and base are made of 1/4" walnut plywood and the letters are glitter acrylic. I use masking to help prevent charring on the wood and tried a dish soap method to coat the acrylic which also prevented a dull finish. On the back of the acrylic, I use a 3M double-sided adhesive which let me stick the letters onto the sign without dealing with glue.
The bottom base slot is 7.85" x .2097" and the sign is between .21" and .23" in depth. Depending on how tight I use the calipers. The width of the sign is 7.85. Somehow this works for me so the sign slips into the base.
Please let me know if you have any questions!
Materials Used for this Project
(Note, those with an (A) behind them are affiliate links which means I might be able to get a small percentage back with no additional cost to you.)
GlowForge – My referral link gets you $300 off the Plus or $500 of the Pro! https://glowforge.us/f/UHJTTYKB
¼” Walnut Plywood Board – https://ocoochhardwoods.com/scroll-saw-lumber/walnut/
1/8” (3mm) Red Glitter Acrylic - https://houstonacrylic.com/collections/glitter-acrylic/products/1-8-0-118-3-0mm-red-glitter-12-x-20-sheet
1/8” (3mm) Silver Glitter Acrylic - https://houstonacrylic.com/collections/glitter-acrylic/products/1-8-0-118-3-0mm-silver-glitter-12-x-20-sheet
Deco Premium Silver Oil Pen (A): https://amzn.to/3hbZRHy
Magnets used to mark edges (A): https://amzn.to/3jlEg1Z
3M Double-sided Adhesive (A): https://amzn.to/3y3H3B6
Masking for Vinyl (A): https://amzn.to/3hfwJPx
Mineral Oil (A): https://amzn.to/3y15eQv
Polyacrylic (A): https://amzn.to/3A7ZbM0
Foam Brushes (A): https://amzn.to/3A5y7g9
Видео How to Make a Wooden Desktop Sign using Walnut Plywood, Glitter Acrylic and a GlowForge Basic канала Hello Fairytale by Nicole Heath
Показать
Комментарии отсутствуют
Информация о видео
29 июня 2021 г. 16:00:23
00:21:48
Другие видео канала
Valentine's Day Cards for School - GlowForge ProjectInspiration Monday: Time-lapse illustration etched with GlowForge and colored with alcohol inksGlowForge Tutorial on Engraving a Tile, pre-colored with Alcohol InkInspiration Monday: Time-lapse of Desktop Sign AssemblyValentine's Day Card - GlowForge ProjectHand Painted Wooden Puzzle using iPad Pro + GlowForge BasicGluing an image to wood with a heat pressWelcome to my Hello Fairytale YouTube Channel!Attempt at a Logo Sign - Failed Attempt #1GlowForge Laser Cut Jigsaw Puzzle using Alcohol Inks and White Acrylic PlasticGlowForge Valentine's Day Puzzles TutorialGlowForge Tutorial on Engraving Bamboo Cutting BoardsUsing a GlowForge Laser to Outline a Design on Canvas: Part 1GlowForge Tutorial on Engraving a Dry Erase/Whiteboard to Create a Customized Family Weekly MenuGlowForge Laser Cut Jigsaw Puzzle using Waterslide Decals on Wood