Almost lost it! Why just an active balancer is not enough!
The BMS disconnected several times! Saved the battery. Just because the active balancer was too slow and could not keep up. I share my findings and thoughts with this situation occurred last weekend. I was really happy with the active balancer until this moment. It seems like, it has still trouble to catch up with the demand of pushing amps back and forward in such a high capacity setup. Luckily the BMS was there and disconnected the battery once one cell hit 3.65V.
It was a bit disappointing to see that the active balancer was struggling to prevent the BMS from disconnecting the battery several times. The balance currents just were not large enough to make a difference while still charging the cells at the same time with 20A.
I probably have to give the system more time to top balance now and need to increase the absorption voltage slowly so the balancer can keep up. It's still not an ideal solution... Also, the absorption voltage was set to 3.45V only which means there is still a lot of energy to be 'balanced' across the cells until the voltage moves. We're still in the flatter area of the curve. It is more beneficial if the cell voltage is higher and amps moved have a bigger impact on the cell voltage. I'll keep testing....
Testing the difference of charging to 3.4V and 3.5V with and without Absorption.
https://youtu.be/pijPu7t-akM
Please subscribe and join me on my journey of the Off-Grid Garage!
For more information, please check out my website with links to all the batteries, materials, devices and products I have used in my videos: https://off-grid-garage.com
The 'buy me a beer 🍻' link is here (on the website, scroll all the way down):
https://off-grid-garage.com Thank you for your support!
***** These are the batteries you are looking for *****
🔋➡EVE LF280 LiFePO4 cells 3.2V/280Ah: https://off-grid-garage.com/batteries/
🌞➡Solar, Controllers, Inverters and accessories: https://off-grid-garage.com/solar/
🔧➡Tools, Analysers and Testers: https://off-grid-garage.com/equipment/
📈➡ Battery Tests and Results: https://off-grid-garage.com/battery-data/
🔌➡Batteries, charger and accessories: https://off-grid-garage.com/batteries-3/
⚡➡Cables, Inverters and Electronics: https://off-grid-garage.com/electronics/
Get 5% off when buying Bluetti all-in-one Power Storage Products!
https://off-grid-garage.com/bluetti/
New to AliExpress? Use my referral code below to register and earn US$19 store credit. What a great start! https://a.aliexpress.com/_mrtR9Ux
Take a live sneak peak at the Off-Grid-Garage in the Victron VRM World:
https://vrm.victronenergy.com/installation/100328/share/2e028071
My Tesla referral code (free 1500 SuperCharger km / 1000mi for you and me)
https://ts.la/stefan96963
Видео Almost lost it! Why just an active balancer is not enough! канала Off-Grid Garage
It was a bit disappointing to see that the active balancer was struggling to prevent the BMS from disconnecting the battery several times. The balance currents just were not large enough to make a difference while still charging the cells at the same time with 20A.
I probably have to give the system more time to top balance now and need to increase the absorption voltage slowly so the balancer can keep up. It's still not an ideal solution... Also, the absorption voltage was set to 3.45V only which means there is still a lot of energy to be 'balanced' across the cells until the voltage moves. We're still in the flatter area of the curve. It is more beneficial if the cell voltage is higher and amps moved have a bigger impact on the cell voltage. I'll keep testing....
Testing the difference of charging to 3.4V and 3.5V with and without Absorption.
https://youtu.be/pijPu7t-akM
Please subscribe and join me on my journey of the Off-Grid Garage!
For more information, please check out my website with links to all the batteries, materials, devices and products I have used in my videos: https://off-grid-garage.com
The 'buy me a beer 🍻' link is here (on the website, scroll all the way down):
https://off-grid-garage.com Thank you for your support!
***** These are the batteries you are looking for *****
🔋➡EVE LF280 LiFePO4 cells 3.2V/280Ah: https://off-grid-garage.com/batteries/
🌞➡Solar, Controllers, Inverters and accessories: https://off-grid-garage.com/solar/
🔧➡Tools, Analysers and Testers: https://off-grid-garage.com/equipment/
📈➡ Battery Tests and Results: https://off-grid-garage.com/battery-data/
🔌➡Batteries, charger and accessories: https://off-grid-garage.com/batteries-3/
⚡➡Cables, Inverters and Electronics: https://off-grid-garage.com/electronics/
Get 5% off when buying Bluetti all-in-one Power Storage Products!
https://off-grid-garage.com/bluetti/
New to AliExpress? Use my referral code below to register and earn US$19 store credit. What a great start! https://a.aliexpress.com/_mrtR9Ux
Take a live sneak peak at the Off-Grid-Garage in the Victron VRM World:
https://vrm.victronenergy.com/installation/100328/share/2e028071
My Tesla referral code (free 1500 SuperCharger km / 1000mi for you and me)
https://ts.la/stefan96963
Видео Almost lost it! Why just an active balancer is not enough! канала Off-Grid Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Why the active balancer only works at high voltageA 48V, 280Ah straight short. How the right equipment saves you!Why DALY BMS' are so popular? Exactly, I don't know either.Good price, excellent service, I could not resist! 16 more EVE 280Ah LiFePO4 batteries delivered!NEEY - Smart Active Balancer for Li Batteries. Is this what we're looking for?Making the FINAL CONNECTIONS for my MASSIVE Off-Grid Solar System!Lithium Cells in Float Charge. Will it destroy your battery?I bought a 1.5kW Solar System for $200!Do this and you don't need a BMS 😉Active Cell Balancer vs Equalization. Why it does not work with LiFePO4 🔋⚡Compressing swollen Grade B LiFePo4 prismatic cells. Let's experiment. Don't try it at home.Running the house from the battery seems impossible!YOU found the problem with the QUCC BMS. Can we fix it?Solar Panel Multimeter WS400A - can it identify faulty and bad solar panels?Testing the JK BMS... but instead I found a problem! 🤔😑Regenerative Discharging with good efficiency. Part 2Creating cell-unbalance with an active balancer?Full and empty LiFePO4 battery in parallel. THESE are the AMPS we're looking for! ⚡⚡⚡How to arrange all your battery gear? Best practice?