I make an Industrial Style Shelf Bracket, bending Steel Rebar into a knot - MIG Welding Project

I make an Industrial Style Shelf Bracket after bending Steel Rebar into a knot to use inside the shelf bracket. I love the look of industrial furniture and all the decor that comes with it, and this shelf bracket has the look I like. A nice MIG Welding Project using rebar.

I hope you enjoy my video of the steel rebar knot shelf bracket project, it was a lot of fun to make. I did make other brackets exactly the same, so I could hang the shelves.

Main tools used, a MIG welder, angle grinder, drill, and a bench vise.

The big rebar is 12mm, and the small rebar is 7mm

Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.

Hope you found something of use in my video or at least found it entertaining.

►►Subscribe to our Channel for more videos ►► http://bit.ly/2ULxLJogavinclark

-----Product Links-----
-----Filming Equipment used in this video----

1. Camera - Canon EOS M6 Mirrorless Digital Camera with 15-45mm Lens, here is the link:
https://amzn.to/2WmEdti

2. Camera Tripod- Vanguard Alta Pro 2+ 263AB 100 Aluminum Tripod with Alta BH-100 Ball Head and Multi-Angle Center Column for Sony, Nikon, Canon DSLR Cameras
https://amzn.to/3y5z8mV

3. Camera Microphone - Rode Microphones VideoMicro Compact On-Camera Microphone
https://amzn.to/3iKFcel

Note: When you bend metal/rebar, you naturally weaken it. Bending it cold will normally cause fine cracks, and it may even break if you put enough strain on the rebar or bend it in the same place too many times. Do not rely on cold-bent steel/rebar to support a load.

Gavin Clark DIY

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!

Видео I make an Industrial Style Shelf Bracket, bending Steel Rebar into a knot - MIG Welding Project канала Gavin Clark