Glass Forged Carbon Fiber Nautilus
Coating a 3D printed shell with red glass forged carbon fiber fabric, no vacuum bag required.
0:10 Making a template by covering the item in masking tape.
0:23 Covering the shell bottom to keep overlapping carbon fiber from sticking.
0:38 Molding clay on release plastic into the center grooves so the carbon fiber fabric can be compressed into the details during cure.
0:58 Cutting out pattern pieces from glass forged fabric. Inner edges are torn instead of cut so the overlapping joints will blend seamlessly into the pattern.
1:25 Adding epoxy resin to backs of pieces and positioning on part using silicone release coated nylon peel ply.
2:41 Laying small pieces of non-porous peel ply over the fabric to keep it resin rich.
3:04 Placing the clay block into the center to press fabric into fine details.
3:10 Wrapping shrink tape around part and heating to compress.
4:29 Removing shrink tape, clay and peel ply from fully cured parts.
5:28 Sanding overhanging edges and front surface to smooth part.
6:41 Adding coats of epoxy resin to get a good cosmetic finish.
8:27 Red glass forged carbon fiber skinned nautilus shell with wooden display stand.
·······················································
▶▶▶ Supplies◀◀◀
Nautilus 3D Model: https://www.thingiverse.com/thing:955219
Glass Forged Carbon Fiber Fabric: https://ulticarbon.com/products/
https://www.etsy.com/shop/ULTICARBON
Epoxy Resin: https://compositeenvisions.com/deep-set-epoxy-river-table-thick-casting-epoxy-resin-hardener-kit/
Proto-Pasta Matte Fiber HTPLA Filament: https://amzn.to/2lm2Nbd
Rotary Cutting Set: https://amzn.to/2uau81m
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
CA: https://amzn.to/2Z4yHaE
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
CA: https://amzn.to/2KngMYD
Recorded on Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
CA: https://amzn.to/2WlHc4d
Lighting Kit
USA: https://amzn.to/2DfaMiG
CA: https://amzn.to/2IiFcjy
The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.
#ForgedCarbonFiber #ULTICARBON #3DPrinting #GlassForged #CarbonFibre #ForgedCarbonFibre #forgedcarbonfiberskinning #forgedcarbon #seashell
Видео Glass Forged Carbon Fiber Nautilus канала Lindy Design Lab
0:10 Making a template by covering the item in masking tape.
0:23 Covering the shell bottom to keep overlapping carbon fiber from sticking.
0:38 Molding clay on release plastic into the center grooves so the carbon fiber fabric can be compressed into the details during cure.
0:58 Cutting out pattern pieces from glass forged fabric. Inner edges are torn instead of cut so the overlapping joints will blend seamlessly into the pattern.
1:25 Adding epoxy resin to backs of pieces and positioning on part using silicone release coated nylon peel ply.
2:41 Laying small pieces of non-porous peel ply over the fabric to keep it resin rich.
3:04 Placing the clay block into the center to press fabric into fine details.
3:10 Wrapping shrink tape around part and heating to compress.
4:29 Removing shrink tape, clay and peel ply from fully cured parts.
5:28 Sanding overhanging edges and front surface to smooth part.
6:41 Adding coats of epoxy resin to get a good cosmetic finish.
8:27 Red glass forged carbon fiber skinned nautilus shell with wooden display stand.
·······················································
▶▶▶ Supplies◀◀◀
Nautilus 3D Model: https://www.thingiverse.com/thing:955219
Glass Forged Carbon Fiber Fabric: https://ulticarbon.com/products/
https://www.etsy.com/shop/ULTICARBON
Epoxy Resin: https://compositeenvisions.com/deep-set-epoxy-river-table-thick-casting-epoxy-resin-hardener-kit/
Proto-Pasta Matte Fiber HTPLA Filament: https://amzn.to/2lm2Nbd
Rotary Cutting Set: https://amzn.to/2uau81m
Dremel Flex Shaft
USA: https://amzn.to/2ElU5O5
CA: https://amzn.to/2Z4yHaE
Dremel Rotary Tool
USA: https://amzn.to/2IxD4CZ
CA: https://amzn.to/2KngMYD
Recorded on Canon Powershot G7X
USA: http://amzn.to/2oqPTEu
CA: https://amzn.to/2WlHc4d
Lighting Kit
USA: https://amzn.to/2DfaMiG
CA: https://amzn.to/2IiFcjy
The above links include Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases when you shop through these links at no additional cost to you. Thank you.
#ForgedCarbonFiber #ULTICARBON #3DPrinting #GlassForged #CarbonFibre #ForgedCarbonFibre #forgedcarbonfiberskinning #forgedcarbon #seashell
Видео Glass Forged Carbon Fiber Nautilus канала Lindy Design Lab
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Molding a Mask with Forged Carbon Fiber FabricForged Carbon Fiber Steering Wheel Skinning/WrappingCarbon Fiber Car Mirror Cover Lessons LearnedStabilized Carbon Fiber Comparison (Pro Finish vs Web-Lock vs Spray Adhesive)Carbon fiber Wisebond epoxyD.I.Y Skinning a Front Lip in Real Carbon Fiber!!Hand Laminate & Vacuum Bag a Simple Carbon Fibre Part (inc. Vacuum Cleaner method!)Forged Carbon Fiber Skinning/Wrapping Car Center Console - No Vacuum Bagging RequiredMaking Complex Carbon Fibre Tubes Using a Split-MouldForged Carbon Fiber Skinning / Wrapping a Skull Full Face MaskКованый карбон. Изготовление крышки зеркала в вакууме. Forged carbon fiber. Cap Skyline R32. DIYForged Carbon Skinning my R34 Z-Tune Fenders | DIYForged Carbon Fiber Fabric Features & Tips🛠Making Carbon Fiber Molds (Scrappy Bush Plane 12)Carbon Fiber Infusion - How to in less than 10 min! Complete Process!Carbon Fiber Plate with Epoxy Resin [DIY]Smoothing & Molding a 3D Printed MaskThe Home of Zenvo | Episode 1: The WheelMolding Ford Emblem with Forged Carbon Fiber FabricDIY Forged Carbon Skinning on a Budget 370Z engine panels!