BUGATTI BODYWORK: DOOR PANEL AND GAP FITTING
It's Friday and we are still playing with the bodywork on the door gaps. These are handmade doors that have been welded solid on each and every seam, including around the window. As we apply body filler, keep in mind that we are sanding it all off until we hit metal. This will bring everything to the same surface level. Bodywork can be a long process, so once you become good at it, the next step is becoming fast 🔥www.hiltzautoco.com
Видео BUGATTI BODYWORK: DOOR PANEL AND GAP FITTING канала Bad Chad
Видео BUGATTI BODYWORK: DOOR PANEL AND GAP FITTING канала Bad Chad
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Tailgate fabrication from scratch for the 1935 Plymouth custom truckThe fabrication continues on the 1935 Plymouth pickup truckCreating the perfect door gap using this simple trick ✅ 1935 PlymouthThe next hurdle is to add structural integrity to the roofPre-1968 vintage hotrod drag racing with serious horsepower engines 🇦🇺🏁We have to widen the rear fenders to fit the box sidesFabricating a new firewall out of 14 gauge aluminumSpraying high build primer on the body ✅Bad Chad's 1st day in Australia 🇦🇺Sheathing in the roof before we start fabricating the box 😎Using 3" exhaust pipe to fabricate running boards on 1935 Plymouth truckJolene is butt welding the widened rear fender on the 1935 PlymouthFinal video of the roof chop: fitting the door topsHood fabrication — sheathing with sheet metal 🚨 1928 FordHeadboard fabrication + application... 1935 Plymouth truckFabricating a chain latch for the tailgate...1935 Plymouth pickup truckSheathing in the back of the cab with 18 gauge sheet metalRear end swap on 1940's Plymouth Coupe 🔁The $1,000,000 question… are we ready to paint the body?The hardest part of making the cab... body line fabrication from scratchBad Chad gets unexpected reaction from fans at WANTED Hotrod and Custom car show 🇦🇺