1997-2001 Honda CR250 - Water Pump Rebuild | FixYourDirtBike
How To Service The Water Pump On Your 1997-2001 Honda CR250
Your water pump is located at the front of your crankcase on the right side. Right next to the oil level plug is a tiny opening. The other side of this opening sits between the impeller shaft oil and coolant seals. If you can see oil, coolant, or both coming out of that opening, your water pump is no longer sealed and needs to be repaired.
You can change the gasket on your water pump without removing the right crankcase cover. But if you need to change the seals, bearing, or impeller, your right crankcase cover must be removed.
Full How-To Guide → https://bit.ly/9701cr250wtrpmp
Coolant System Specifications → https://bit.ly/9701cr250clngspcs
Checkout My New Merch! → https://bit.ly/FYDBMerch
Jump Around:
Intro 0:00
Water Pump Removal 0:35
Clean & Inspect 1:04
Disassembly 1:22
Water Pump Assembly 2:09
Installation 2:59
The Tools You Will To Service Your Water Pump Need Are:
- 8mm socket
- Socket Wrench
- Inch-Pound Torque Wrench
- Blind Bearing Puller
- Socket For Oil Seal
- Socket For Water Seal
- Flat Head Screwdriver
- Lithium grease
- Scraper
- Dremel
- Parts Cleaner
- Shop Towels
- Safety Glasses
- Mallet
- Small Pick
You Can Get All The Dirt Bike Parts And Tools You Need Through Our Partner Links! → http://bit.ly/fydbparts
#FixYourDirtBike #CR250 #WaterPump
-----------------------------------------------------------
Question?
Website:
FixYourDirtBike.com
Directory:
FixYourDirtBike.com/Directory
Facebook:
FaceBook.com/FixYourDirtBike
Forums:
FixYourDirtBike.com/Forums
Instagram:
https://www.instagram.com/fixyourdirtbike
Twitter:
https://twitter.com/FixYourDirtBike
You can help me take Fix Your Dirt Bike to the next level by supporting me At Patreon - https://www.patreon.com/FixYourDirtBike and buying your parts here - https://www.fixyourdirtbike.com/shop-and-support/
My Recording Gear:
Camera: Cannon 70D - http://bit.ly/70dfydb
Camera: Cannon 80D - http://bit.ly/80dfydb
Camera: GoPro Hero 4 Black - http://bit.ly/hero4fydb
Camera: Android Endoscope - http://bit.ly/fydbscope
Microphone: Rode Videomic - http://bit.ly/rodefydb
Lighting: Fancierstudio 2400 Watt Lighting Kit - http://bit.ly/lightfydb
All media, unless otherwise specified, is the property of Mantle Media & Consulting, Inc 2020 Checkout My New Merch! → https://bit.ly/FYDBMerch
Видео 1997-2001 Honda CR250 - Water Pump Rebuild | FixYourDirtBike канала Fix Your Dirt Bike
Your water pump is located at the front of your crankcase on the right side. Right next to the oil level plug is a tiny opening. The other side of this opening sits between the impeller shaft oil and coolant seals. If you can see oil, coolant, or both coming out of that opening, your water pump is no longer sealed and needs to be repaired.
You can change the gasket on your water pump without removing the right crankcase cover. But if you need to change the seals, bearing, or impeller, your right crankcase cover must be removed.
Full How-To Guide → https://bit.ly/9701cr250wtrpmp
Coolant System Specifications → https://bit.ly/9701cr250clngspcs
Checkout My New Merch! → https://bit.ly/FYDBMerch
Jump Around:
Intro 0:00
Water Pump Removal 0:35
Clean & Inspect 1:04
Disassembly 1:22
Water Pump Assembly 2:09
Installation 2:59
The Tools You Will To Service Your Water Pump Need Are:
- 8mm socket
- Socket Wrench
- Inch-Pound Torque Wrench
- Blind Bearing Puller
- Socket For Oil Seal
- Socket For Water Seal
- Flat Head Screwdriver
- Lithium grease
- Scraper
- Dremel
- Parts Cleaner
- Shop Towels
- Safety Glasses
- Mallet
- Small Pick
You Can Get All The Dirt Bike Parts And Tools You Need Through Our Partner Links! → http://bit.ly/fydbparts
#FixYourDirtBike #CR250 #WaterPump
-----------------------------------------------------------
Question?
Website:
FixYourDirtBike.com
Directory:
FixYourDirtBike.com/Directory
Facebook:
FaceBook.com/FixYourDirtBike
Forums:
FixYourDirtBike.com/Forums
Instagram:
https://www.instagram.com/fixyourdirtbike
Twitter:
https://twitter.com/FixYourDirtBike
You can help me take Fix Your Dirt Bike to the next level by supporting me At Patreon - https://www.patreon.com/FixYourDirtBike and buying your parts here - https://www.fixyourdirtbike.com/shop-and-support/
My Recording Gear:
Camera: Cannon 70D - http://bit.ly/70dfydb
Camera: Cannon 80D - http://bit.ly/80dfydb
Camera: GoPro Hero 4 Black - http://bit.ly/hero4fydb
Camera: Android Endoscope - http://bit.ly/fydbscope
Microphone: Rode Videomic - http://bit.ly/rodefydb
Lighting: Fancierstudio 2400 Watt Lighting Kit - http://bit.ly/lightfydb
All media, unless otherwise specified, is the property of Mantle Media & Consulting, Inc 2020 Checkout My New Merch! → https://bit.ly/FYDBMerch
Видео 1997-2001 Honda CR250 - Water Pump Rebuild | FixYourDirtBike канала Fix Your Dirt Bike
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Restoration old water pump - Honda CR 250 - year 1992Water Pump Repair: CRF450R 02-08 (Dirt Bike Tutorial) + SHOP MANUAL!!97-01 Honda CR250 - Engine Top End - Part 10: Exhaust Valve - InstallReplace Water Pump Mechanical Seal - CX500 Part 91997-2001 Honda CR250 Clutch Service | Fix Your Dirt Bike.comCoolant Leak AnswerA Problem With My CR250 Engine Build!1997-2001 Honda CR250 - Ignition System Troubleshooting | FYDB1997-2001 Honda CR250 - Final Detail & Prep | Fix Your Dirt BikeHow To Rebuild an ATV/Motorcycle Water Pump97-01 Honda CR250 - Bottom End Rebuild - Part 4: Assembly & Install2001 CR250 Power ValveCRF 450 / 250 Weep Hole Coolant / Oil Leak Fix97-01 Honda CR250 - Engine Top End - Part 12: Cylinder - InstallationBuilding My CR250 Engine!2003 cr125 Bottom End Rebuild Part 2CR125 Engine Rebuild - TeardownCambio Reten Bomba de Agua - Enduro y Motocross97-01 Honda CR250 - Top End - Part 6: Cylinder Head - Inspection