Fixing A CD Player That Doesn't Read Discs - Laser Alignment / Power Adjustment Tweak - Repair Guide

In this video I repair a faulty CD player that doesn't read discs anymore, instead it just makes ticking sounds. This is caused by the laser being unable to align with and read the disc over time. You can normally do this little adjustment trick to fix the problem at no cost. All you require to try this repair is a few screwdrivers and a little bit of your time for some trial and error.

You will sometimes find the player will intermittently read CDs, only read certain types of disc, or even skip and jump while playing. Almost all of these type issues are usually caused by the laser alignment which you can easily adjust internally in most cases.

Most CD player mechanisms are almost identical so this guide should cover most common units.
In this video I show you the repair on a KAM KCD 960 Twin Professional Rack-Mounted Unit.

It should also be a very similar process for a DVD player that is misbehaving and not reading discs properly.

This repair will usually last a good while providing the laser is not defective and worn-out/dying. In this case you would need to look for a replacement laser assembly and replace that part of the mechanism, which is fairly straight-forward but out of the scope of this video.
I have also made a quick video guide on fixing CD or DVD players with sticky trays that won't open or intermittently stick. You can watch that video here: https://youtu.be/D7mSueezAGc
Follow my social media here: http://www.nph-network.co.uk/socials.php (Facebook, Twitter, etc..)

You can send tips/donations to show your support via my website: http://www.nph-network.co.uk/donate.php

Recorded using an iPhone 6S in 4K Ultra-HD.

Видео Fixing A CD Player That Doesn't Read Discs - Laser Alignment / Power Adjustment Tweak - Repair Guide канала Nathan PH