Wood Stove from Car rims DIY

If you would like to download plans for this project, click the blue "JOIN" button next to the SUBSCRIBE button :)

As you've seen, the stove looks very nice and works even better.
I think this construction is much better than the previous one. I used other solutions and better materials which gave me an interesting effect.

I bought rims at the junkyard, they were not fit for use because they were bent.
I used large rebar to make the grate. I am sure that they will last for at least a few years, especially burning "from above".
The sheet used to make the bottom, top and other parts is 2 mm thick, and the legs made from square tubing 5x5 cm.
The car brake disc you have seen is used to store heat and stiffen the top.
I made the door frames from a flat bar 50x4mm
Remember not to use the usual glass, because it breaks under the influence of high temperatures!

I am very happy from this project, it can very quickly heat a large room and additionally gives the possibility of
cooking. What's more, the firelight shining through the glass gives an amazing atmosphere in the privacy of your
home.

We have prepared the project of this stove, only patreons have access to that who have supported us with three dollars or more.Remember, by supporting us with this amount, you get access to all projects that are currently available.
----------------------------------------­­------------------------------------
Follow us on:
INSTAGRAM www.instagram.com/made_inpoland/
FACEBOOK www.facebook.com/1187887134621389/
----------------------------------------­­------------------------------------

Видео Wood Stove from Car rims DIY канала Made in Poland