How To Solder Copper Pipes With Water In It: Plumber's Bread Trick DIY

How do you solder copper pipe if pipe is dripping water after shutting the water main off? This DIY video shows you all about soldering copper pipe with water in it. We'll teach you about this old plumbing trick to soldering copper pipe and how to use this Plumber's Bread Trick to solder copper pipe with water in it.

Trolls come here and to claim we never de-burred the pipe before soldering copper pipes, we did indeed de-burr the copper pipe, it is not in the final plumbing bread trick DIY video. At 6:09 in the plumbing bread trick video, you can see my gray de-burring tool sitting on the shower curb.

✅ Tools used in this plumbing tips DIY video:
✅ Bernzomatic Trigger-Start Torch Kit : https://amzn.to/2Bzj80K
✅ RIDGID Close Quarters Tubing Cutter: https://amzn.to/2BT7bD6
✅ Oatey 31400 black cloth Flame Protector 9-Inch x 12-Inch https://amzn.to/2mI7DjT
✅ Armour Line Pipe And Tubing Reamer: https://amzn.to/2Rut3OQ
✅ Plumber's Solder Kit: https://amzn.to/2BWr0cP
✅ 1/2" Jet Swet Plumbing Plug Tool (Alternative to bread trick): https://amzn.to/2VB4RJW
✅ Jet Swet 2100 Kit Tools 1/2" to 1" copper pipes, carrying case: https://amzn.to/2SGXeA1

✅ SUBSCRIBE: https://bit.ly/2vj06cB

✅ WATCH: Why is my Kitchen Sink P-Trap Leaking at Connection Nut?: https://youtu.be/cEjiICErSQg

✅ WATCH: How to Replace A Kitchen Sink Drain Strainer, Repair Leak: https://youtu.be/nBlyqU7NJJI

✅ How to Replace a Hose Bibb/Spigot - Soldering Hose Bib
https://youtu.be/73Sn71X4fGc

This is 1 of many plumbing tricks, a plumbers bread trick, how to solder pipes and sweating copper fittings. We hope you enjoy our plumbing repair videos and learn how to solder copper pipe with water inside after the main water valve is shut off.

How To Solder Copper Pipe with water in it

We'll teach you correct way how to solder copper pipes. It will be no sweat for you to learn how to sweat copper pipes and copper fittings.

The plumbing bread trick for soldering copper pipe with water in it

Soldering pipes with water in the pipe is impossible; water cools copper pipe so solder will never flow. This plumbing dilemma happens at 50% of our properties. Our plumbing tips show you how to sweat copper pipe with water in them.

Use our plumbing tricks when soldering copper pipe with water in it.

You cut off the main water but water still leaks and drips out of the copper pipe. You cannot solder your copper fittings until you stop water from dripping out of the copper pipe. A few drops of water in the copper pipe will prevent solder from flowing.

Plumber's bread trick to save the day

This is an old plumbing trick, the Plumbers Bread Trick. To stop water from dripping from the copper pipe, you wad up some white sandwich bread in a dense ball and push it into the pipe past the area where you'll solder copper pipes. You'll learn how to solder pipes with our bread trick, plumbing tips.

Bread in pipe is how to solder pipes with water in them.

Bread stops water from reaching copper pipe connection where copper fittings will be soldered. It blocks water long enough for you to solder copper fittings in place while soldering copper pipe. This is how to solder copper pipe with water in it.

After soldering pipes using plumbers bread trick

Once you know how to solder copper pipes with the plumbing bread trick and completed your plumbing repair solder connection, don't forget to flush the bread from your plumbers bread trick out of the copper pipe, so it does not clog the valve that you place on the end of your pipe. After soldering copper pipe, remove the bread from your plumber's bread plumbing tricks out of the pipe by flushing it out of the copper pipe with water.

After you solder dripping pipes

The best way to flush out bread after your plumbing trick and soldering pipes is completed is at the end of this plumbing how to video. Turn on the main water until you hear the pipes fill up with water under pressure for 2 seconds, then immediately shut off the water. This will make the chunk of bread shoot out the pipe into a waiting 5 gallon bucket as seen in this DIY how to video and now your plumber's bread trick is complete.

How to solder copper pipes

We hope you like our plumbing tricks for soldering pipes with water in them, see our other plumbing repair videos, for best plumbing tips and plumbing how to projects, like how to solder copper pipes.

If you like this how to solder and plumbing repair videos, click on the thumbs up icon, and subscribe to this channel to keep up with our useful home remodeling and DIY videos after you watch this how to solder copper pipes video.

Congratulations, now that you've seen this useful soldering copper pipes plumbing videos, you now know how to solder a copper pipe with water in it, while tricking mother nature at the same time. Now you can teach your friends these plumbing tips how to sweat copper pipe when wet using the plumbing bread trick, putting bread in pipe to solder! You can teach an old dog new plumbing tricks.

Видео How To Solder Copper Pipes With Water In It: Plumber's Bread Trick DIY канала jeffostroff