Turbo Tercel Walk Around -[Read Desc for pricing]-

So my swap was fully done by me to a 4efte engine from a toyota glanza v (4efte's from a starlet gt-turbo also work), all gaskets, timing and ignition components were replaced such as oil pump, wires etc. Only a couple parts you'll need to get imported such as the timing belt it's self and the cap and rotor for the ignition system, every other part is identical to an older paseo, there's actually a list somewhere showing compatible parts if you need it. The swap for the motor w/manual transmission will cost you around $1500, make sure it comes with COMPLETE UNCUT wire harness with all sensors including the vacuum sensor which reads the boost pressure
I sent my wire harness plus the glanza v's harness to a guy in Florida known as GTREVVA who has been doing them for over 20+ years since I don't trust myself doing the wiring but that cost $300
now for all parts to fix up the motor before you put it back in you'll be around $2500 total if all work done by yourself, clutches for this thing are like $90 for a stage 3 on ebay which is overkill on a stock motor
sorry if this is a mess, I'm kinda tired at the moment

-The $2500 includes the motor w/trans and wire harness w/ecu + custom harness + all around maintenance parts-

Видео Turbo Tercel Walk Around -[Read Desc for pricing]- канала Yung Wad