Engraving and Printing Fred the Bug
This short video shows the entire process of making a relief engraving on a block of Resingrave, from transferring the drawing to actual engraving to printing the final edition. A Resingrave block is a synthetic material that is a great substitute for end-grain boxwood (traditionally used for wood engraving but very expensive).
I buy my blocks and tools from McClains Printmaking Supply: http://www.imcclains.com/catalog/blocks/resingrave.html
Other supplies I am using are a Conrad E-15 Etching Press, Black oil-based relief ink from Graphic Chemical, and Mohawk Superfine Paper..
The LENK transfer tool I use can be found here: http://a.co/d/3sz4hOR
The wooden jig that holds the blocks and paper on the pressbed is something a friend of mine made to custom fit my press. It is basically a simple frame with a cross piece attached to a thinner plywood. I hope to make a future video on how to make one.
“FRED!” was printed in a limited edition of 90 S&N prints. They are available in our Etsy shop HERE: https://www.etsy.com/SpoffordPress/listing/638514349/fred-the-bug-letterpress-print-engraving
------------------------------------------------
Check us out :
WWW.SPOFFORDPRESS.COM
INSTAGRAM – @ericvonzip
FB : https://www.facebook.com/SpoffordPress/
-------------------------------------------------
Music:
“LogicXCole Instrumental” – ThatKidGoran
“Rise Up” – A. Younge
“Resurrection Morning” – A. Younge
“Bluesette LIVE” – B. Ervin
Видео Engraving and Printing Fred the Bug канала Spofford Press
I buy my blocks and tools from McClains Printmaking Supply: http://www.imcclains.com/catalog/blocks/resingrave.html
Other supplies I am using are a Conrad E-15 Etching Press, Black oil-based relief ink from Graphic Chemical, and Mohawk Superfine Paper..
The LENK transfer tool I use can be found here: http://a.co/d/3sz4hOR
The wooden jig that holds the blocks and paper on the pressbed is something a friend of mine made to custom fit my press. It is basically a simple frame with a cross piece attached to a thinner plywood. I hope to make a future video on how to make one.
“FRED!” was printed in a limited edition of 90 S&N prints. They are available in our Etsy shop HERE: https://www.etsy.com/SpoffordPress/listing/638514349/fred-the-bug-letterpress-print-engraving
------------------------------------------------
Check us out :
WWW.SPOFFORDPRESS.COM
INSTAGRAM – @ericvonzip
FB : https://www.facebook.com/SpoffordPress/
-------------------------------------------------
Music:
“LogicXCole Instrumental” – ThatKidGoran
“Rise Up” – A. Younge
“Resurrection Morning” – A. Younge
“Bluesette LIVE” – B. Ervin
Видео Engraving and Printing Fred the Bug канала Spofford Press
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Wood Engraving from Sketch to Print : Holy Carp!Relief Engraving and Printmaking The Tortoise BlockMy First Woodcut -- My Version of a Durer Engraving as a WoodcutINTAGLIO PROCESS: the proof print and applying the aquatint groundScratchboard Illustration of a Horse, TutorialLearn to monoprint from home | Norwich University of the Artsภาพพิมพ์แกะไม้ [2/2] : ขั้นตอนการพิมพ์ (แท่นพิมพ์ / บาเร็ง / ช้อน)Printing Glow In The Dark Letterpress and Silkscreen Vampire Fangs CardsLetterpress Printing Hanukkah Cards on an Etching PressThe Art of the MezzotintLinocut carving and printing - short film by Maarit HänninenПростая гравировкаEngraving a Resingrave Block - The White RhinocerosHow to print with a nipping pressRelief Engraving Printmaking - Concept to Finished PrintHow to make an etchingурок№4 Обронная гравировка"Eden"- Linocut Process by Maarit HänninenHow to make a wood engravingFrom Paper to Copper: The Engraver's Process (2009)