Can you build your own Electronic Stethoscope? Learn how to build and amplifier circuit
In this activity you will build an electronic stethoscope - ok its basically just an audio amplifier that uses physical amplification. We show you how to test the circuit and build the circuit. At the end we will show the signal on an oscilloscope. The electronic stethoscope electrical schematic will be used to build the first part of the circuit - which is an electret microphone. The microphone will be checked to verify it is working. Next we build the amplifier circuit and check to verify it is working correctly - we briefly how how the whole setup can work with a speaker - but the build for that part is going to be in a second video.
If you are looking for similar equipment to use
Milwaukee (without thermocouple) - https://amzn.to/37lJBT6
Best Wire Cutters - https://amzn.to/3xbgf4v
Function generator - https://amzn.to/38yEuj3
200 MHz Digital Oscilloscope 2 Channels, Grey - https://amzn.to/3x0KTxu
Timestamps
0:00 Intro
0:27 Electrical Schematic
1:14 Microphone Circuit
2:15 Microphone Circuit Power Check
3:55 Microphone Output
6:12 Amplifier Circuit
7:40 Amplifier Power Check
8:30 Amplifier Output
12:08 Connecting the Circuit
12:00 Measuring Amplified Signal
14:40 Physical Amplification
16:10 Heartbeat Signal
18:10 Optional Speaker
What you will need
• Resistors 1 kOhm and 100 kOhm
• Capacitors 1uF
• Breadboard(s)
• Jumper wires
• Amplifier LF 353 or alternative
• Power supply
• Resistors two 10 kOhm
• Electret Microphone
Optional
• Oscilloscope
• Function Generator
• Transistors and a Speaker if you want to try the schematic shown at the end
Here are some basic refreshers that are helpful to be able to complete this DIY project
Reading Electrical Schematics
• https://www.youtube.com/watch?v=9cps7Q_IrX0
• https://www.youtube.com/watch?v=_HZ-EQ8Hc8E
Using bread boards
• https://www.youtube.com/watch?v=6bWsIjw1fCM
Amplifiers
• https://www.khanacademy.org/science/electrical-engineering/ee-amplifiers/ee-opamp/v/ee-opamp-intro
Gain
• https://www.allaboutcircuits.com/textbook/semiconductors/chpt-1/amplifier-gain/
• https://www.allaboutcircuits.com/textbook/semiconductors/chpt-1/decibels/
Stay connected!
Youtube Channel - https://www.youtube.com/channel/UCBkQn_WucQ8YpzRFY3EYqMQ
Instagram - https://www.instagram.com/htmworkshop/
Twitter - https://twitter.com/HTMWorkshop
Facebook - https://www.facebook.com/HTM-Workshop-101784815596164
Website - HTM-workshop.com
Видео Can you build your own Electronic Stethoscope? Learn how to build and amplifier circuit канала HTM Workshop
If you are looking for similar equipment to use
Milwaukee (without thermocouple) - https://amzn.to/37lJBT6
Best Wire Cutters - https://amzn.to/3xbgf4v
Function generator - https://amzn.to/38yEuj3
200 MHz Digital Oscilloscope 2 Channels, Grey - https://amzn.to/3x0KTxu
Timestamps
0:00 Intro
0:27 Electrical Schematic
1:14 Microphone Circuit
2:15 Microphone Circuit Power Check
3:55 Microphone Output
6:12 Amplifier Circuit
7:40 Amplifier Power Check
8:30 Amplifier Output
12:08 Connecting the Circuit
12:00 Measuring Amplified Signal
14:40 Physical Amplification
16:10 Heartbeat Signal
18:10 Optional Speaker
What you will need
• Resistors 1 kOhm and 100 kOhm
• Capacitors 1uF
• Breadboard(s)
• Jumper wires
• Amplifier LF 353 or alternative
• Power supply
• Resistors two 10 kOhm
• Electret Microphone
Optional
• Oscilloscope
• Function Generator
• Transistors and a Speaker if you want to try the schematic shown at the end
Here are some basic refreshers that are helpful to be able to complete this DIY project
Reading Electrical Schematics
• https://www.youtube.com/watch?v=9cps7Q_IrX0
• https://www.youtube.com/watch?v=_HZ-EQ8Hc8E
Using bread boards
• https://www.youtube.com/watch?v=6bWsIjw1fCM
Amplifiers
• https://www.khanacademy.org/science/electrical-engineering/ee-amplifiers/ee-opamp/v/ee-opamp-intro
Gain
• https://www.allaboutcircuits.com/textbook/semiconductors/chpt-1/amplifier-gain/
• https://www.allaboutcircuits.com/textbook/semiconductors/chpt-1/decibels/
Stay connected!
Youtube Channel - https://www.youtube.com/channel/UCBkQn_WucQ8YpzRFY3EYqMQ
Instagram - https://www.instagram.com/htmworkshop/
Twitter - https://twitter.com/HTMWorkshop
Facebook - https://www.facebook.com/HTM-Workshop-101784815596164
Website - HTM-workshop.com
Видео Can you build your own Electronic Stethoscope? Learn how to build and amplifier circuit канала HTM Workshop
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Medical Device RecallInfusion Pump: IDA-1S Infusion Device Analyzer Flowside Start Set Up Part 2Hard Work #lessonslearned #storytime #engineering #teacherKiCAD Project PCB Layout | Part 6Voltage Measurement ActivityDIY Pulse Oximeter with Arduino: Graphical Viewer & Troubleshooting TipsBuild a KiCad Project Schematic | Part 1Infusion Pump: Hospira Alaris Visual InspectionLinux networking overviewMirthConnect Setup - Real Hardware TestMirthConnect Setup - Database SetupPort Forwarding and NAT (part 1/2)KiCad Choosing Parts | Part 3Electrosurgery Coagulation Function - ESUTold never going to happen…BUT GUESS WHAT!How much solder is enough?Thermal linkage in solderingDirectly networking the ECGs (networking overview part 3)Arduino based electrocardiograph from HTM-Workshop.comKiCAD Custom Footprint | Part 4Classify Your Medical Device