HOW TO make a Sandblasting box! | DIY For beginners on a tight budget and VERY EASY!

Hi Everyone!
In this video, I will show you HOW TO MAKE A SANDBLASTING BOX for beginners on a tight budget and very easy!

Just follow my steps in the description below and watch the video to be able to sandblast your rusty parts. Keep watching till the end to see how much money I've spent 💵🤑

Let's go!
1. Split the 2 plastic tubes into 2 pieces. Measure, tape, and cut. you now have 4 pieces.
2. Mark a suitable place and height for your hands/pipes
3. Drill the holes, 120 mm diameter
4. Put the pipes in the holes
5. Drill 2 more holes for ventilation on the opposite side, 120 mm diameter
6. Put the pipes in the holes
7. Drill a hole on the side of the box, big enough to fit the connection on the hose
8. Pull the hose through the hole
9. Tape the gap between the hole and the hose
10. Get the gloves through the holes and fold them over the edge.
11. Use a zip tie to secure the gloves
12. Dust filter, cut it to size, and then use a zip tie
13. Connect the hose to your air compressor
14. Fill the gun with sand and start working :)

OPTIONAL STEPS
14. Measure how big a hole you’d like in the lid. NOTE! The hole has to be smaller than the plexiglass, about 3-4 cm smaller.
15 Mark where you want to cut
16. Drill holes in each corner
17. Use a jigsaw and cut the hole in the lid.
18. Attach a rubber list to the edge on the lid
19. Drill holes for the hinges, not too close to the hole, the plastic may crack
20. Drill holes for the hinges in the plexiglass, make sure you can close it
20. Put the plexiglass on the lid and bolt it down
21. On the opposite side of the plexiglass, drill a hole through the plexiglass and the lid. Lock the plexiglass down with a bolt and wing nut.

Here you can find the products I used (in Sweden):
Box incl. lid: https://www.ikea.com/se/sv/p/samla-lada-med-lock-transparent-s69903214/
Clips: https://www.ikea.com/se/sv/p/samla-lasclips-foer-lada-55-130-l-transparent-00120842/
Plastic pipes: https://www.jula.se/catalog/bygg-och-farg/vatten-och-sanitet/avlopp/avloppsror-och-tillbehor/dubbelmuff-452189/
Blasting gun: https://www.jula.se/catalog/verktyg-och-maskiner/tryckluft/tryckluftsverktyg/blasterpistoler-och-tillbehor/blasterpistol-076100/
Gloves: https://www.jula.se/catalog/klader-och-skydd/herrklader/arbetshandskar/kemskyddshandskar/vinylhandskar-903108/
https://www.jula.se/catalog/verktyg-och-maskiner/tryckluft/tryckluftsverktyg/blasterpistoler-och-tillbehor/blastersand-018297/
Hose: https://www.jula.se/catalog/verktyg-och-maskiner/tryckluft/kompressortillbehor/slangar-och-vindor/spiralslang-018030/#tab02
Filter: https://www.jula.se/catalog/hem-och-hushall/stad-och-kladvard/dammsugare/Dammsugartillbehor/universalfilterset-800199/

If you'd like to follow me and see more of this kind of video, please click on subscribe, thumbs up and leave a comment! I will answer every single comment :)

Видео HOW TO make a Sandblasting box! | DIY For beginners on a tight budget and VERY EASY! канала Henrik's Restorations