Setting pre verto steel flywheels
The message here, is depending on the parts you fit will change the horn height setting needed to get the diaphragm flat. Both the flywheels featured here are the same units.
So don’t just assemble the parts and hope for the best they need to be optimised to ensure that the load on the crank thrust washers is minimised to ensure a long service life and also you maximise the holding torque of the clutch.
Видео Setting pre verto steel flywheels канала AC Dodd
So don’t just assemble the parts and hope for the best they need to be optimised to ensure that the load on the crank thrust washers is minimised to ensure a long service life and also you maximise the holding torque of the clutch.
Видео Setting pre verto steel flywheels канала AC Dodd
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
On the road tuning with ACDodd - Episode 18, Canterbury
Overdrive/Economy drop gears for classic transverse A+ series engines
CMC Riviera Run 2024 - Tuning demonstration by ACDodd - Part 3 ‘it’s all about timing’
My Solar install……
On the road ‘tuning’ from a customers perspective….. Part 1
On the road ‘tuning’ with ACDodd - S3, Ep12, 2 Mini and a Moggy!
Crankshaft regrinds
1275 head rebuild + mods - Part 6 Finish!
On the road ‘tuning’ with ACDodd - S3, Ep6
Engine club - Episode 4, Part 2 Kevin’s gearbox continued
My Machine tools, part 5 - Excel 2V vertical milling machine
On the road ‘tuning’ with ACDodd - S2, Ep 18 - This and that……
ACDodd Mobile tuning & Tuning training
On the Road tuning with ACDodd - Episode 8
1275 head rebuild + Mods - Part 2
On the Road tuning with ACDodd - Episode 4, Tuning at MLMotorsport
On the road Tuning with ACDodd - Season 2 Episode 12
On the road Tuning with ACDodd - Rolling road tuning Twin HS2’s
On the road ‘tuning’ with ACDodd - Season 2 Episode 14
Maglite upgrades - Part 2
Maglites, comparing factory units with aftermarket upgrades