Drill Master 6" chop saw review (with demo)
Here is a review of the Drill Master 6" saw from Harbor Freight. Some cutting jobs with this saw are disappointing however it does some cutting jobs very well! Video explains cutting blade life and has demo cutting 2"x1/4" flat stock.
Видео Drill Master 6" chop saw review (with demo) канала rob12449
Видео Drill Master 6" chop saw review (with demo) канала rob12449
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
(part 1) Rebuild HW heater comb chamber floor
will I regret: synthetic motor oil in my compressor?
furnace liner follow up
Brake Line Flaring: part 2
How do I change the wipers on this car???
Inside a 28 yo hot water heater (Bock 32e)
diy paints auto door handle; some tips;
Rob's first rust repair on his 92 F-150.
harbor freight / central pneumatic new green spray gun 56982: cheap gun comparison
cheap "HVLP" spray gun which comes with 1.4; 1.7; & 2.0; needle / jet / air cap sets
Harbor Freight - Purple Gun - Important Info!
DupliColor Clear Gloss and Matte Paint Shop finishes
HF purple spray gun comparison, these two are different!
Review: Portable Tote Gas welding set
Dupli-Color Paint Shop: Molten Red Metallic, and Burnt Orange Metallic!
Brake Line Flaring: tips (line slip)
(Part1) Starfire Acrylic Enamel review: Vanilla Cream; Clear; Fathom Green;
More cheap spray gun tips and info
dehumidifier repair: diagnose; repair leak; test; try;
(part 6) furnace combustion chamber liner replacement