Finishing Twin I Beam Suspension on Our 1000cc Mini Trophy Truck | 12" of travel!

We finish building the twin traction beam (or twin I beam) front suspension for our 1000cc mini trophy truck build. We used long travel shocks we found online for $50 each, they were originally meant to be used as helper springs. The coil over shocks themselves have 10 inches of travel, but we have about 12 inches of travel considering how we set up the suspension. This custom build homemade front suspension looks great, now all we need is steering and we should find out if it works well!

Thanks for Watching!

Facebook: https://goo.gl/VR6mh2
Instagram: https://goo.gl/PqOIo3

Go Power Sports: https://goo.gl/c2Tz6o
NEW MERCH: http://www.cars-cameras.com/
Equipment we use: https://www.amazon.com/shop/carsandcameras

The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Видео Finishing Twin I Beam Suspension on Our 1000cc Mini Trophy Truck | 12" of travel! канала CarsandCameras