Iconic Fabrication & Hayden Transmission Cooler install

In this video, we’ll be installing a transmission cooler along with a vehicle-specific mounting bracket from Iconic Fabrication on our 5th Gen 4Runner. We’ll cover the required tools, walk through each step of the installation process from start to finish, and demonstrate the proper procedure for setting the transmission fluid level accurately.

Iconic Fabrication Transmission Bracket & Cooler Kit: https://iconicfabricationoffroad.com/products/2010-4runner-transmission-cooler-bracket-kit

- Toyota ATF-WS Transmission Fluid
- Set Level Drain Crush Washer: (P/N 90341-10021) https://parts.longotoyota.com/oem-parts/toyota-trans-pan-drain-plug-9034110021
- 3/8" to 3/8" barbed Brass Hose Splitter: Buy @ your local hardware store
- ScanGuage 3: https://amzn.to/4n4Jjkq

CHAPTERS:
00:00 - Intro
00:09 - Introduction
00:23 - What's in the Box
02:00 - Tools Needed
03:53 - Step 1: Attach Cooler to Bracket
04:57 - Step 2: Remove Skid Plates
05:19 - Step 3: Remove Radiator Shroud
05:40 - Step 4: Unbolt & Remove Bumper (Disconnect Accessories)
07:04 - Step 5: Unbolt/Unclip Hardline Bracket
07:22 - Step 6: Unbolt Hood latch Bottom Bolt
08:23 - Step 7: Connect & Sheath Hoses
10:59 - Step 8: Unbolt Condenser Line, Unbolt Coolant Reservoir, & Disconnect Transmission Hard & Soft line
12:03 - Step 9: Install 3/8" Brass fitting into Soft line
12:11 - Step 10: Fill cooler with Transmission fluid
12:57 - Step 11: Connect Hoses to Transmission lines
13:50 - Confirm hoses are secure & everything is bolted back down
14:33 - Step 12: Add transmission fluid to Transmission
15:19 - Step 13: Reinstall & Torque Fill plug
16:52 - Step 14: Set Transmission's Set Level Drain Plug fluid level
18:06 - Step 15: Install crush washer onto Set Level Drain plug and install

Видео Iconic Fabrication & Hayden Transmission Cooler install канала Chasing Voodoo