Josco Polishing Demonstration
Josco’s range of polishing equipment, including a huge variety of polishing buffs plus complementary tapered spindles and compounds, are well regarded throughout Australia as a market leading brand.
To see our range of Polishing products, click here:
http://www.josco.com.au/product-cat/polishing/
How-to Guide:
1. All buffs have tapered centre bores and may be mounted on the left or right side of your grinder using a Josco Tapared Spindle.
2. Select the correct buff for your job. For help in selecting the right buff your your job, click here: http://www.josco.com.au/resource/select-the-right-buff-and-compound/
3. Never use different compounds on one buff - keep a seperate buff for each compound.
4. Dress the buff with compound across the face of the rotating wheel for a few seconds, taking care not to apply too much compound which will overload the buff. It is far better to apply a small amount of compound more frequently than to over dress the buff.
5. After dressing the buff, bring the work piece into contact with light pressure, moving back and forth across the work piece.
6. After polishing, remove any residue with mineral turpentine or methylated spirits. Warm soapy water will also work.
ALWAYS WEAR SAFETY GOGGLES OR EYE PROTECTION.
Видео Josco Polishing Demonstration канала Josco Australia
To see our range of Polishing products, click here:
http://www.josco.com.au/product-cat/polishing/
How-to Guide:
1. All buffs have tapered centre bores and may be mounted on the left or right side of your grinder using a Josco Tapared Spindle.
2. Select the correct buff for your job. For help in selecting the right buff your your job, click here: http://www.josco.com.au/resource/select-the-right-buff-and-compound/
3. Never use different compounds on one buff - keep a seperate buff for each compound.
4. Dress the buff with compound across the face of the rotating wheel for a few seconds, taking care not to apply too much compound which will overload the buff. It is far better to apply a small amount of compound more frequently than to over dress the buff.
5. After dressing the buff, bring the work piece into contact with light pressure, moving back and forth across the work piece.
6. After polishing, remove any residue with mineral turpentine or methylated spirits. Warm soapy water will also work.
ALWAYS WEAR SAFETY GOGGLES OR EYE PROTECTION.
Видео Josco Polishing Demonstration канала Josco Australia
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How To Restore a Buffing Wheel - Clean and remove caked up compound using a rake - KRVR Chef Knives](https://i.ytimg.com/vi/0LjKaOcgVmM/default.jpg)
![Eastwood 1 HP Buff Motor Dual Speed on badly oxidized chrome.](https://i.ytimg.com/vi/xmUDuXp6J_U/default.jpg)
![Polishing Aluminium and Steels with a Bench Grinder Metal Polishing Kit.](https://i.ytimg.com/vi/ZLfgjeq86fw/default.jpg)
![Making a metal polishing Wheel - Buffing Wheel ( DYI Srilanka Inventions )](https://i.ytimg.com/vi/79neHuCtnVQ/default.jpg)
![Tuto N°1 : Le Polissage ALP](https://i.ytimg.com/vi/lut94Jx_dTs/default.jpg)
![Customer review: How to use Dialux Polishing Compounds for all metals and plastics](https://i.ytimg.com/vi/JPhqBsQNN6A/default.jpg)
![Easy Way to Polish Aluminum | POLISHING ALUMINUM](https://i.ytimg.com/vi/9qDC1b-1WhI/default.jpg)
![Learn Stainless Steel Grinding and Polishing on welding Joints - By AMbros custom](https://i.ytimg.com/vi/HTSRRzE4tOw/default.jpg)
![Principles Of Polishing To Perfection](https://i.ytimg.com/vi/g7N6sol6nCo/default.jpg)
![Tips & Tricks for Polishing / Buffing Stainless Steel Trim Part 3.MPG](https://i.ytimg.com/vi/mWy9awGv6so/default.jpg)
![Finishing Secrets - Wax - Buffing - 2](https://i.ytimg.com/vi/1XgspdjERyI/default.jpg)
![How To Introduction Polish With Dremel](https://i.ytimg.com/vi/9Sfyb986Atg/default.jpg)
![TM Adjustable Speed Polishing Machine, Bench Grinder, For Jewelry Making, Woodcrafting, Manual DIY.](https://i.ytimg.com/vi/ew6cFPnF5-4/default.jpg)
![Easy way to Sharpen a knife within a minute, bench grinder hack required](https://i.ytimg.com/vi/AKlul2eCLeA/default.jpg)
![Buffing Systems](https://i.ytimg.com/vi/fwdvofFgz6c/default.jpg)
![Making a Little Polishing Tool (Buffing Wheel)](https://i.ytimg.com/vi/KQHZWLvtQNo/default.jpg)
![Info for knife buffing](https://i.ytimg.com/vi/z4HTIbVKgaw/default.jpg)
![General Purpose Metal Polishing Kits](https://i.ytimg.com/vi/6tuzartmudI/default.jpg)
![What are the different types of rouge?](https://i.ytimg.com/vi/1z7c0aw7xqY/default.jpg)
![Polishing Aluminum Metal to a High Luster Mirror Finish with Wood on the mini lathe](https://i.ytimg.com/vi/VPmIRAz0XhY/default.jpg)