The Time Machine: A Homemade Gaming Seat
"The Time Machine" is a homemade gaming seat built from 50mm PVC pressure pipes.
The following parts were used in the building process (links to Amazon.de where available):
8x PVC 50mm pressure pipe 1m http://www.amazon.de/dp/B005HDK41U
18x 90° angle segment http://www.amazon.de/dp/B005HCOMDW
6x 45° angle segment http://www.amazon.de/dp/B003Y7AKTM
28x T-segment http://www.amazon.de/dp/B005HDINLI
2x pieces of wood 110mm x 40mm x 500mm
8x 50mm clamps
3x cans of black spraypaint
1x saw
1x box of sandpaper
1x measuring tape
1x pencil
1x Pattex 100% All-Purpose glue 100g
8x SPAX screws
1x phillips head screwdriver
1x pack of zip ties, black, 400mm
1x used car seat
1x seat cover from Amazon http://www.amazon.de/dp/B00JFMI3AS
The measurements are as follows:
Total length: 135cm
Total width (no arms): 55cm
Total width (including arms): 116cm
Total height (without seat and camera pipe): 64cm
Total height (including camera pipe): 125cm
You can find a picture with all the separate measurements added to it in this imgur album:
http://imgur.com/a/Fwy0r
I took inspiration from this build: https://www.reddit.com/r/oculus/comments/2bl9td/370aud_later_and_im_dk2ready_bring_it_on/ which in turn was based on this build: http://www.isrtv.com/forums/topic/681-simul8r-mark-ii-pvc-plans-bottom-of-pg-7-donations-accepted/?page=1
Видео The Time Machine: A Homemade Gaming Seat канала Andy Mayer
The following parts were used in the building process (links to Amazon.de where available):
8x PVC 50mm pressure pipe 1m http://www.amazon.de/dp/B005HDK41U
18x 90° angle segment http://www.amazon.de/dp/B005HCOMDW
6x 45° angle segment http://www.amazon.de/dp/B003Y7AKTM
28x T-segment http://www.amazon.de/dp/B005HDINLI
2x pieces of wood 110mm x 40mm x 500mm
8x 50mm clamps
3x cans of black spraypaint
1x saw
1x box of sandpaper
1x measuring tape
1x pencil
1x Pattex 100% All-Purpose glue 100g
8x SPAX screws
1x phillips head screwdriver
1x pack of zip ties, black, 400mm
1x used car seat
1x seat cover from Amazon http://www.amazon.de/dp/B00JFMI3AS
The measurements are as follows:
Total length: 135cm
Total width (no arms): 55cm
Total width (including arms): 116cm
Total height (without seat and camera pipe): 64cm
Total height (including camera pipe): 125cm
You can find a picture with all the separate measurements added to it in this imgur album:
http://imgur.com/a/Fwy0r
I took inspiration from this build: https://www.reddit.com/r/oculus/comments/2bl9td/370aud_later_and_im_dk2ready_bring_it_on/ which in turn was based on this build: http://www.isrtv.com/forums/topic/681-simul8r-mark-ii-pvc-plans-bottom-of-pg-7-donations-accepted/?page=1
Видео The Time Machine: A Homemade Gaming Seat канала Andy Mayer
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Hints & tips to DIY a PVC Sim driving rig, Part 1 of 5Homemade Cockpit Build Simracing BMW E39PVC Cockpit 45PVC cockpit 38Ultimate Homemade Budget Racing Sim RigFabrication d’un cockpit complet pour simulateur de courseHOW TO MAKE LOGITECH INVERTED PEDALS DIYBest DIY Sim Racing Rig For Under $35! (Budget Build w/ Plans)PVC cockpit 49 F1COCKPIT EM PVCPVC Race RIG DIY Add-On for Wheel Stand ProDIY PVC Sim Racing Rig For Under $200 by Inside Sim RacingPVC cockpit (30) F1styleCheap Wood Race Sim DIY Build (feat. Papa Bunyun) - Project WOOPBuilding Flight Simulators with PVC Pipes3 day rig build out of PVC pipe.Pvc cockpit 2DIY Aluminum Sim Racing Rig BuildMy pvc cockpitHow to make PVC Tees to slide on a PVC tube