SP1 Real-Time Stereo Vision System
The SP1 stereo vision system (and also its successor SceneScan) is Nerian Vision Technologies' solution for real-time depth sensing. This stand-alone device connects to two USB industrial cameras, which are set-up in a common stereo alignment. The SP1 processes the images of both cameras in real-time, using a hardware implementation of a state-of-the-art stereo matching algorithm. The computed depth map is transmitted through gigabit ethernet to an attached computer or an embedded system.
Stereo vision is a passive approach to depth perception, which allows its use in situations where active 3D sensors fail. This is usually the case in situations with bright ambient light such as outdoors at sunshine. The SP1 provides the user with dense 3D sensory information even in such difficult conditions. For industries where changing and difficult lighting conditions are common, such as in the logistics sectors, the SP1 provides a viable solution for acquiring 3D sensory information.
Another key advantage of the SP1 is its versatility. Other 3D sensor systems are designed for observing one pre-defined volume. For industrial plants that process products of very different sizes, or for customers which need to cover an unusual measurement range, available 3D sensors might not be sufficient. The SP1 allows the user to control the covered volume through the choice of camera distance and optics. The user also has a choice over the image sensor, which he can pick according his requirements.
The camera setup can be adjusted at any point if the application requirements change. This makes camera calibration critical. Many existing stereo cameras are shipped pre-calibrated and do not allow for a re-calibration by the user. The SP1, on the other hand, provides an easy user interface that facilitates a re-calibration within minutes. Hence, depth measuring can be resumed shortly after the camera setup has been adjusted.
Find out more at:
https://nerian.com/products/scenescan-stereo-vision/
Видео SP1 Real-Time Stereo Vision System канала Nerian Vision GmbH
Stereo vision is a passive approach to depth perception, which allows its use in situations where active 3D sensors fail. This is usually the case in situations with bright ambient light such as outdoors at sunshine. The SP1 provides the user with dense 3D sensory information even in such difficult conditions. For industries where changing and difficult lighting conditions are common, such as in the logistics sectors, the SP1 provides a viable solution for acquiring 3D sensory information.
Another key advantage of the SP1 is its versatility. Other 3D sensor systems are designed for observing one pre-defined volume. For industrial plants that process products of very different sizes, or for customers which need to cover an unusual measurement range, available 3D sensors might not be sufficient. The SP1 allows the user to control the covered volume through the choice of camera distance and optics. The user also has a choice over the image sensor, which he can pick according his requirements.
The camera setup can be adjusted at any point if the application requirements change. This makes camera calibration critical. Many existing stereo cameras are shipped pre-calibrated and do not allow for a re-calibration by the user. The SP1, on the other hand, provides an easy user interface that facilitates a re-calibration within minutes. Hence, depth measuring can be resumed shortly after the camera setup has been adjusted.
Find out more at:
https://nerian.com/products/scenescan-stereo-vision/
Видео SP1 Real-Time Stereo Vision System канала Nerian Vision GmbH
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Stereo 3D Vision (How to avoid being dinner for Wolves) - ComputerphileInside Adam Savage's Cave: Awesome Robot Spider!SceneScan – 3D Sensing with Stereo VisionDeepGait: Planning and Control of Quadrupedal Gaits using Deep Reinforcement Learning (Presentation)Eye vs. camera - Michael Mauser12 CAMERA ANGLES to Enhance Your FilmsFast 3D Sensing Through FPGA-BasedImage ProcessingInside a Camera at 10,000fps - The Slow Mo GuysObject Detection using Machine Learning and Distance Estimation using Stereo VisionStereo Vision with GoPro Hero3Geometry of Stereo Vision ExplainedStereo Camera Calibration in MATLAB with Steps and ExampleThe REAL Reason we spent $140,000 on 8K Cameras - ft Corridor DigitalAutomatic Camera Re-Calibration for Robust Stereo VisionWhat if the Universe is a Computer Simulation? - ComputerphileDSLRigger Release Video - Open Source Camera SystemDetermining Distance with Stereo Vision and MATLAB (PowerPoint presentation)How to Sync Multiple Video and Audio Tracks: Multiple Cameras, Angles & Tracks!How To Create a 3D Model Using DroneDeployLecture 16: Stereo