How To Change Ola S1 Pro Gen 2 / Gen 3 Front Break Pad in 5 Minutes? | Step By Step DIY

**How To Change Ola S1 Pro Gen 2 / Gen 3 Front Brake Pad | Step By Step DIY Guide 🛵🔧**

In this video, I’ll show you how to **change the front brake pads of your Ola S1 Pro (Gen 2 & Gen 3)** at home with a simple step-by-step method. If your scooter is making noise, losing braking power, or the brake pads are worn out, this DIY guide will help you fix it easily and save money.

🔧 **Tools Required:**
• Allen key / Hex key set
• Spanner (usually 10mm / 12mm)
• Screwdriver
• Gloves (for safety)

🛠️ **Step-by-Step Process:**

1. Put the scooter on stand
2. Locate the front brake caliper
3. Remove caliper mounting bolts
4. Take out old brake pads
5. Clean the caliper area
6. Insert new brake pads
7. Refit caliper and tighten bolts
8. Press brake lever to set pads properly

⚠️ **Important Tips:**
• Always check brake fluid before riding
• Don’t press brake without pads installed
• Ride slowly for first few km to set new pads
• Replace pads when thickness is very low

💡 **When to Change Brake Pads?**
If you hear squeaking noise, reduced braking, or vibration, it’s time to replace them. Many users report faster wear depending on riding conditions and weather. ([BikeWale][1])

🛒 **Brake Pads Info:**
Compatible brake pads for Ola S1 / S1 Pro Gen 2 & Gen 3 are easily available online and are designed for quick installation. ([Meesho][2])

👍 If this video helped you, don’t forget to
Like ❤️ | Share 🔁 | Subscribe 🔔

FOLLOW ME ON:
📸 Instagram: http://www.instagram.com/aidealryder
🐦 Twitter: http://twitter.com/aidealryder
▶️ Youtube Channel: http://bit.ly/30nKjWY

MY FAVOURITE EQUIPMENT:
🎥Moto Vlogging Setup :- https://amzn.to/3oUcsT7
🎯Amazon Page :- https://amzn.to/34oc1qQ

🎼 Beat provided by https://freebeats.io
Produced by White Hot

SUPPORT MY WORK :
⬛ On Youtube: https://bit.ly/3hJm91R

--------------------------------------------------------------------------------------------------
#aidealryder #OlaS1Pro #BrakePadChange #OlaElectric #EVRepair #DIYMechanic #ScooterMaintenance #Gen2 #Gen3

Видео How To Change Ola S1 Pro Gen 2 / Gen 3 Front Break Pad in 5 Minutes? | Step By Step DIY канала Aideal Ryder