Universal Joints - Part 1: Introduction
Weber State University (WSU) - Automotive Technology Department - Transmission Lab. This is the first in a series of videos on universal joints, constant velocity joints, and driveshafts. We will cover their history, proper nomenclature (names), joint types, diagnostics, service procedures, service tools, and more.
Timeline
0:00 Start
0:08 Introduction
4:13 Differences in universal joints
5:29 Differences in constant velocity joints
7:04 Universal joint service tools and procedures
8:54 Measurements of universal joint axial endplay and centering
10:19 Driveshaft and driveline types
12:20 Constant velocity driveshafts and drivelines
14:00 Series summary
This video series helps partially cover the following NATEF Master Tasks:
3.D.1. Diagnose constant-velocity (CV) joint noise and vibration concerns; determine necessary action.
3.D.2. Diagnose universal joint noise and vibration concerns; perform necessary action.
3.D.4. Inspect, service, and replace shafts, yokes, boots, and universal/CV joints.
3.D.5. Check shaft balance and phasing; measure shaft runout; measure and adjust driveline angles.
3.E.4. Measure drive axle flange runout and shaft end play; determine necessary action.
Subscribe to the weberauto Youtube channel for more great videos.
Visit the following website for information on how to attend our school and obtain an associate's degree or bachelor's degree in Automotive Technology.
http://www.weber.edu/automotive
This video was created and edited by Professor John D. Kelly at WSU. For a full biography, see http://www.weber.edu/automotive/J_Kelly.html
Видео Universal Joints - Part 1: Introduction канала WeberAuto
Timeline
0:00 Start
0:08 Introduction
4:13 Differences in universal joints
5:29 Differences in constant velocity joints
7:04 Universal joint service tools and procedures
8:54 Measurements of universal joint axial endplay and centering
10:19 Driveshaft and driveline types
12:20 Constant velocity driveshafts and drivelines
14:00 Series summary
This video series helps partially cover the following NATEF Master Tasks:
3.D.1. Diagnose constant-velocity (CV) joint noise and vibration concerns; determine necessary action.
3.D.2. Diagnose universal joint noise and vibration concerns; perform necessary action.
3.D.4. Inspect, service, and replace shafts, yokes, boots, and universal/CV joints.
3.D.5. Check shaft balance and phasing; measure shaft runout; measure and adjust driveline angles.
3.E.4. Measure drive axle flange runout and shaft end play; determine necessary action.
Subscribe to the weberauto Youtube channel for more great videos.
Visit the following website for information on how to attend our school and obtain an associate's degree or bachelor's degree in Automotive Technology.
http://www.weber.edu/automotive
This video was created and edited by Professor John D. Kelly at WSU. For a full biography, see http://www.weber.edu/automotive/J_Kelly.html
Видео Universal Joints - Part 1: Introduction канала WeberAuto
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
EVA Vibration Sensor CalibrationsThank You!I am Finally BackWorld's First Mass-Produced Automatic Transmission - Part 2 - Guts and GearsUnderstanding Coolant Flow in a TeslaWorld's First Mass-Produced Automatic Transmission - Part 4 - Hydraulic Components and Control2016 - 2022 Prius, Prius Prime Transaxle - P610 Quick LookHow to De-energize the High Voltage System of a Mach-E GTChevrolet Bolt EV Coolant System LoopsMach E GT Battery and Cooling System ServiceUnderstanding the Acura Sport Hybrid2011-2015 Chevrolet Volt InverterAutomotive Vibration Analyzers - Part 4 of 5 - GM PicoScope NHVThe History of Automatic Transmission Fluids (ATF): Part 1 - IntroductionFord Fusion HF-35 Hybrid Transaxle Electrical OperationAutomotive Vibration Analyzers - Part 2 of 5 - EVATransmission Bearings, Gaskets, and Seals- AUSV 2520The 16V Li-Ion Battery used by TeslaAutomatic Transmission Clutch Pack Clearance Check with Dial IndicatorThe High Voltage System of a Mach-E GT1998 - 2003 Prius Transaxle - P111 Quick Look