Air Leakage Test illinois

The complete Illinois Air Leakage test. This is sometimes called the maximum leakage rate test. This test is broken down into 6 distinct parts:

1. Setup
2. Static Test
3. Applied Test
4. 1st fandown aka the warning light and buzzer test
5. 2nd fandown aka the button pop out test
6. Recovery

If you're from Iowa you'd skip the Static test and go directly into the applied test and you would NOT turn the key off between the 1st and 2nd fandown. Otherwise it's pretty much the same steps.

Видео Air Leakage Test illinois канала Kristopher Gilbert