Onewheel Pint Extended Battery VNR Mod DIY

I love my Onewheel Pint but I really hate the range it gives you so I decided to go ahead and void the warranty while extending my range a ton!

Below I’ve included links to all the parts used, you can get everything right off Amazon. This cost me about half the cost of one of the ready-made VNR kits.

If you liked this or it helped at all let me know, I love hearing from you guys! Subscribe and help out the channel too.
Follow up video on range/speed and how far I actually went: https://youtu.be/ZHhfObyg75E

*** 4/4/2020 Update - The circuit breaker switch failed. It failed while I was not using it however, switch would not engage. I decided at that point to go ahead and just remove it. I then hardwired the positive directly to the XT60 connector. I plan on possibly adding a inline fuse within the controller box in the future. Because of this I do not recommend using the switch I used in the video. ***

Board Hardware 5300, firmware 5042

Battery - https://amzn.to/2T5Lny9
Alternative Battery (in case first sells out) - https://amzn.to/3aYEvZJ

Power Plug - https://amzn.to/383gyOG

Posi-Taps - https://amzn.to/2VmC2Dv

XT60 Quick Connections - https://amzn.to/3acfRDZ

14AWG Wire - https://amzn.to/2Th9jgJ

Heat Shrink Tubing - https://amzn.to/3802NjS

Silicone - https://amzn.to/2PulF3Q

Cable Sleeve - https://amzn.to/2PtxTtz

5-Point Torx Bits - https://amzn.to/2HVmajt

Eagle Creek Daypack - https://amzn.to/2Hk0YEH

Padded Backpack Insert - https://amzn.to/2SKpqkx

#onewheel #vnr #onewheelpint #onewheelhack #onewheelxr

Видео Onewheel Pint Extended Battery VNR Mod DIY канала Dallas and Aimee