Food and Mass Ratio | FM Ratio | Hindi | science classes
Food and Mass Ratio
The F/M ratio is a process control number that helps you to determine the proper number of microorganisms for your system. To do this calculation, you will need the following information:
Influent Flow into your activated sludge system (Flow MGD)
Influent CBOD (mg/l) concentration into your aeration tank.
Mixed Liquor Volatile Suspended Solids Concentration (mg/l)
Volume (in gallons) of your aeration system
The term Food to Microorganism Ratio (F/M) is actually a measurement of the amount of incoming food ( Lbs of Influent CBOD) divided by the Lbs of Microorganisms in your system. Some calculations also include the volume of activated sludge in your clarifiers, the one demonstrated here does not. If you have an activated sludge system, you should determine your F/M ratio regularly.
To determine the amount of incoming food (F), you need to know the CBOD of the influent into your activated sludge(aeration) system. You also need to know the flow(MGD). So to calculate the amount of food we do the following calculation:
F= Influent Flow (MGD) X Influent CBOD Concentration (mg/l) X 8.34
To determine the volume of microorganisms (M), you need to know the volume of your aeration system and you need to know the concentration of Volatile Solids in your aeration system (MLVSS) or Mixed Liquor Volatile Suspended Solids.
#etpknowledgejunction
#science_classes
#sludge_volume_index
#chemical_oxygen_demand
#biochemical_oxygen_demand #Importance_of_BOD_and_COD #Wastewater_treatment #waste_water_treatment #activated_sludge_process
#sanjeet_rawat
#microorganisms_and_BOD
#food_and_mass_ratio
______________________________________________
Watch the full videos and keep supporting the channel.
ETP Q & A || sawal jawab::
https://youtu.be/BS8p-obHcpM
Biochemical oxygen demand::
https://youtu.be/URvWDDHF8NY
Standard procedure for analysis of mlvss and mlss::
https://youtu.be/dgTWus-U8Q0
Standard procedure for Analysis of Dissolve Oxygen::
https://youtu.be/qKbL0nLRDBw
Standard procedure for chemical oxygen demand::
https://youtu.be/-oz7MPvzId4
effluent treatment plant :: https://youtu.be/rZv2bwwmwMc
you can ask any question to us by social media and we will try to solve your queries so please follow us on social media.
Stay tuned with the science classes by following on social media:
Facebook:: https://www.facebook.com/scienceclassesofficial/
Facebook Sanjeet Rawat::
https://www.facebook.com/sanjeet.rawat.7
Instagram:: https://www.instagram.com/iamsanjeetrawat/?hl=en
facebook Group::
https://m.facebook.com/groups/154870968535789/
________________________________________________
Видео Food and Mass Ratio | FM Ratio | Hindi | science classes канала ETP Knowledge Junction
The F/M ratio is a process control number that helps you to determine the proper number of microorganisms for your system. To do this calculation, you will need the following information:
Influent Flow into your activated sludge system (Flow MGD)
Influent CBOD (mg/l) concentration into your aeration tank.
Mixed Liquor Volatile Suspended Solids Concentration (mg/l)
Volume (in gallons) of your aeration system
The term Food to Microorganism Ratio (F/M) is actually a measurement of the amount of incoming food ( Lbs of Influent CBOD) divided by the Lbs of Microorganisms in your system. Some calculations also include the volume of activated sludge in your clarifiers, the one demonstrated here does not. If you have an activated sludge system, you should determine your F/M ratio regularly.
To determine the amount of incoming food (F), you need to know the CBOD of the influent into your activated sludge(aeration) system. You also need to know the flow(MGD). So to calculate the amount of food we do the following calculation:
F= Influent Flow (MGD) X Influent CBOD Concentration (mg/l) X 8.34
To determine the volume of microorganisms (M), you need to know the volume of your aeration system and you need to know the concentration of Volatile Solids in your aeration system (MLVSS) or Mixed Liquor Volatile Suspended Solids.
#etpknowledgejunction
#science_classes
#sludge_volume_index
#chemical_oxygen_demand
#biochemical_oxygen_demand #Importance_of_BOD_and_COD #Wastewater_treatment #waste_water_treatment #activated_sludge_process
#sanjeet_rawat
#microorganisms_and_BOD
#food_and_mass_ratio
______________________________________________
Watch the full videos and keep supporting the channel.
ETP Q & A || sawal jawab::
https://youtu.be/BS8p-obHcpM
Biochemical oxygen demand::
https://youtu.be/URvWDDHF8NY
Standard procedure for analysis of mlvss and mlss::
https://youtu.be/dgTWus-U8Q0
Standard procedure for Analysis of Dissolve Oxygen::
https://youtu.be/qKbL0nLRDBw
Standard procedure for chemical oxygen demand::
https://youtu.be/-oz7MPvzId4
effluent treatment plant :: https://youtu.be/rZv2bwwmwMc
you can ask any question to us by social media and we will try to solve your queries so please follow us on social media.
Stay tuned with the science classes by following on social media:
Facebook:: https://www.facebook.com/scienceclassesofficial/
Facebook Sanjeet Rawat::
https://www.facebook.com/sanjeet.rawat.7
Instagram:: https://www.instagram.com/iamsanjeetrawat/?hl=en
facebook Group::
https://m.facebook.com/groups/154870968535789/
________________________________________________
Видео Food and Mass Ratio | FM Ratio | Hindi | science classes канала ETP Knowledge Junction
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
FM Ratio Calculation || Aeration tank design || MLSS MLVSS FM RATIOETP Q&A || sawal jawab || science classesBiochemical oxygen demand || BOD || science classesQuestions asked in ETP/WTP/STP Interview | hindi | science classesHow Singapore Uses Science to Stay CoolHow to Calculate F-M Ratio - Wastewater MathHydraulic retention time | Hydraulic residence time | HRT | Science ClassesSludge volume index | SVI | Hindi | science classesHow to Calculate F-M Ratio - Wastewater Math - Explained by MK SONSProcedure of MLSS and MLVSS | MLSS and MLVSS Analysis in hindi | science classesMole Concept - Calculation Of Moler RatioTurbidity of Effluent | Water leaving the secondary clarifier is cloudy and turbid | science classesNitrogen Removal in Municipal WastewaterDissolved oxygen analysis | D.O. ( Winkler method ) | science classes |Excess foaming in the aeration tank | Trouble shooting | science classesBiochemical Oxygen Demand [ BOD ] / Biological Oxygen Demandwhat is activated sludge process (ASP) | How to develop MLSS | Hindi | science classesHow to develop MLSS | Quick Culture development in aeration tank | ETP Knowledge JunctionLow Dissolved Oxygen Issue in ETP || ETP Trouble shooting || ETP Knowledge Junction || Sanjeet Rawat