DIY arduino ignition dyno run
Quick dyno run with my self-made arduino based ignition.
At the end the red line is the stock ecu, the yellow and orange are two back-to-back runs with my ignition.
At low/mid revs loses power for the exhaust valve locked full open, not sure about 10k+ rpm but the two runs are very close each other meaning that everything works reliably.
Видео DIY arduino ignition dyno run канала Lorenzo Grigorov
At the end the red line is the stock ecu, the yellow and orange are two back-to-back runs with my ignition.
At low/mid revs loses power for the exhaust valve locked full open, not sure about 10k+ rpm but the two runs are very close each other meaning that everything works reliably.
Видео DIY arduino ignition dyno run канала Lorenzo Grigorov
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Cagiva mito EV 125 on board giardiniZündapp gs 125 enduro on boardTonight Alive - The Other Side LiveZündapp GS 300 on boardTonight Alive - Hell and Back LiveHercules W2000 SoundPVRIS - White Noise LiveTonight Alive - The Ocean LiveProva video Cagiva mito ev 125Tonight Alive - Listening LiveParamore - Miracle live @ parahoy!DIY arduino ignition firt testZündapp gs 125 cross 26/01/2012Chvrches - Bury it ft. Hayley Williams @ ParahoyHercules W2000 custom exhaust sound checkHercules W2000 Wankel on board 02Zündapp gs 125 on boardDIY arduino ignition quickshifterConfronto mappature Zündapp GS 125 2011Hercueles W2000 Wankel on board