How to Repair Holes in Metal - Video 1 of 3

In today's video I will be showing you how to repair a rather large hole in a cast iron gutter. This is the first of three videos on repairing metal.

You can buy me a coffee here https://www.buymeacoffee.com/charliediyte or become a monthly member to unlock Discord forum membership, exclusive content and automatic entry into my FREE Monthly Giveaway. Thank you SO SO much!!

You can now access my 🛠Charlie DIYte Amazon Tool Store here https://www.amazon.co.uk/shop/charliediyte - where you'll find all my tried, tested and much loved DIY tools arranged into handy categories.

TODAY'S TOOLKIT
- Bosch Professional GWS Angle Grinder https://geni.us/Doyqhw (Amazon)
- Isopon P38 Multi-Purpose Body Filler http://bit.ly/2z5iJlm £9
- Isopon P40 Body Filler for Holes (fibre glass reinforced) http://bit.ly/2SmEzJX £15
- Black & Decker KA900E Power Sander https://geni.us/pNcKANn (Amazon)
- 120 grit sand paper 5m http://bit.ly/2Q0bfYa £10.39
- Hamilton Prestige 4pce Filling Kife set https://geni.us/8OZhYaS (Amazon)
- CT1 Multi Solve Spray https://geni.us/oKGF (Amazon)

As an Amazon Associate I earn from qualifying purchases.

I'm currently repairing and renovating the cast iron gutters on my old cottage. Today's repair is to a badly rusted 90 degree corner section, where the gutter had completely rusted through.

I actually bought a new replacement section from Gutter Supplies http://bit.ly/2ELm6E9 but I couldn't use it as the collar was too close to the corner section, so I had to resort to plan B - of filling the hole and repairing the corner section of my existing gutter.

I bought some Isopon P38 and Isopon P40. The P40 is a fibre glass reinforced filler and so is great for spanning holes. The P38 is a multi-purpose filler which is typically applied on top of the P40 to fill the minor holes and dents.

With the Isopon P40 applied and set, I sanded it lightly with my Black & Decker power file sander. I then applied a thin coat of P38, and once set, sanded this with a 120 grit sand paper.

I then primed the section of gutter with Bonda Rust Primer, and then applied a top coat of Johnstone's Stormshield Gloss.

So that's a large hole fixed. Stay tuned for next week's video where I'll be fixing a smaller hole with Milliput epoxy putty, and then finally glueing a section of gutter back together with JB Weld Epoxy adhesive.

SUBSCRIBE - you can subscribe to my Channel here:
http://www.youtube.com/c/CharlieDIYte

LET'S CONNECT!
Charlie DIYte
-- Email: charliediyte@gmail.com
-- https://www.facebook.com/charliediyte
-- https://charliediyte.co.uk/
-- https://www.instagram.com/charliediyte/
-- https://twitter.com/CharlieDIYte

Видео How to Repair Holes in Metal - Video 1 of 3 канала Charlie DIYte