Last week's recipe for you! Adding borax to melt gold.

@MakeGold 👉 https://www.youtube.com/c/ArchimedesChannel/
Last week's recipe for you! Adding borax to melt gold can be a useful technique to reduce the formation of oxides and other impurities during the melting process. Borax acts as a flux, which means it helps to remove impurities by forming a fluid slag layer that floats on top of the molten gold.
0:01 last week's recipe for you
0:23 the molten gold
0:34 then sprinkle a small amount of borax
1:06surface of the molten gold

To use borax when melting gold, you should first melt the gold in a crucible or furnace until it is fully liquefied. Then, sprinkle a small amount of borax onto the surface of the molten gold and stir it in with a stirring rod. The borax will dissolve and help to reduce any impurities present.

It is important to note that while borax can be helpful in removing impurities, it should be used in moderation. Adding too much borax can result in the formation of a thick and sticky slag that is difficult to remove from the surface of the molten gold. Additionally, care should be taken when handling molten gold, as it is extremely hot and can cause serious burns or other injuries if not handled properly.
hopefully useful for everyone Thank you very much for watching the video.

Видео Last week's recipe for you! Adding borax to melt gold. канала Archimedes Channel