Finishing 3D Prints: How to Paint 3D Printed Parts
0:00 Intro
0:33 Paint Advice
1:33 Paint Test
3:00 Base Coat
3:10 Fixing Runs
3:28 MetalCast Red Coat
3:54 Clear Coat
4:13 Detail Work
6:20 Ending Bits
Finishing 3D Prints: How to Paint 3D Printed Parts
In this video I'll cover how to paint, clear coat and detail 3D printed parts. Painting is not difficult but there are some rules you should follow to get the best finish. The main rule is patience, don't rush coats or dry times.
Buy Helmets from Villainous Prop Shop
https://www.etsy.com/shop/VillainousPropShop?ref=usf_2020
https://villainouspropshop.com/
Things I Used for This Build
https://bit.ly/346flXb
Pick-Up Models from My Site ➜ https://3dprintedprops.com
For 20% OFF Use: 3DPRINTEDPROPS1020
____________________________________________
Check out my 3D Printing Courses on Udemy ➜
3D Resin Printing: From Star to Finish
http://bit.ly/2ZeIBbN
3D Printing: From Start to Finish
http://bit.ly/2Nu91Uh
Design Awesome Graphics For Social Media with Canva
http://bit.ly/2ZhvJly
____________________________________________
Interested in resin 3D Printers?
____________________________________________
Peopoly 3D Resin Printers--
USE CODE 3DPRINTEDPROPS AND GET A BOTTLE OF RESIN (affilate link)
The Peopoly Phenom L ➜
https://bit.ly/3bgYl5q
Peopoly Phenom ➜
https://bit.ly/35j666Z
Peopoly Phenom Noir ➜
https://bit.ly/35ju7ei
Peopoly Phenom XXL ➜
https://bit.ly/3bmg3ED
________________________________________________
Elegoo Mars ➜
https://amzn.to/2SoIV4i
Phrozen Sonic Mini ➜
https://amzn.to/3jqqGYe
Anycubic Photon ➜
https://amzn.to/33u5WcF
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Resin - https://amzn.to/2GfHUcH
Disposable Gloves - https://amzn.to/2SqG7Uu
Plastic Spatula - https://amzn.to/30vuX5c
Metal Spatula - https://amzn.to/33tYUoc
Isopropyl (IPA) - https://amzn.to/3jyATlm
Pickle Container - https://amzn.to/3cX3fDv
Funnel - https://amzn.to/3isSLgo
Paint Filters - https://amzn.to/2HP3LI8
Lunch Tray - https://amzn.to/2Snt9a0
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 - https://amzn.to/3juXlfb
CR-10 - https://amzn.to/36vMyxL
____________________________________________
Gear I'm Using ➜
Sony Alpha a6400 - https://amzn.to/2HNNi70
Sigma 16mm f/1.4 - https://amzn.to/3cZnIaO
Batteries - https://amzn.to/3lcqpbP
Lighting - https://amzn.to/30w2Xi3
________________________________________________
Twitter ➜ https://twitter.com/3DPrintedProps
Instagram ➜ https://www.instagram.com/3dprintedpr...
Facebook ➜ https://www.facebook.com/3DPrintedProp/
YouTube ➜ https://www.youtube.com/3dprintedprops
____________________________________________
Thanks for watching!
#3DPrinting #3dResinPrinting #PeopolyPhenomL #Resin3dPrinting #finishing3dprints
Видео Finishing 3D Prints: How to Paint 3D Printed Parts канала 3D Printed Props
0:33 Paint Advice
1:33 Paint Test
3:00 Base Coat
3:10 Fixing Runs
3:28 MetalCast Red Coat
3:54 Clear Coat
4:13 Detail Work
6:20 Ending Bits
Finishing 3D Prints: How to Paint 3D Printed Parts
In this video I'll cover how to paint, clear coat and detail 3D printed parts. Painting is not difficult but there are some rules you should follow to get the best finish. The main rule is patience, don't rush coats or dry times.
Buy Helmets from Villainous Prop Shop
https://www.etsy.com/shop/VillainousPropShop?ref=usf_2020
https://villainouspropshop.com/
Things I Used for This Build
https://bit.ly/346flXb
Pick-Up Models from My Site ➜ https://3dprintedprops.com
For 20% OFF Use: 3DPRINTEDPROPS1020
____________________________________________
Check out my 3D Printing Courses on Udemy ➜
3D Resin Printing: From Star to Finish
http://bit.ly/2ZeIBbN
3D Printing: From Start to Finish
http://bit.ly/2Nu91Uh
Design Awesome Graphics For Social Media with Canva
http://bit.ly/2ZhvJly
____________________________________________
Interested in resin 3D Printers?
____________________________________________
Peopoly 3D Resin Printers--
USE CODE 3DPRINTEDPROPS AND GET A BOTTLE OF RESIN (affilate link)
The Peopoly Phenom L ➜
https://bit.ly/3bgYl5q
Peopoly Phenom ➜
https://bit.ly/35j666Z
Peopoly Phenom Noir ➜
https://bit.ly/35ju7ei
Peopoly Phenom XXL ➜
https://bit.ly/3bmg3ED
________________________________________________
Elegoo Mars ➜
https://amzn.to/2SoIV4i
Phrozen Sonic Mini ➜
https://amzn.to/3jqqGYe
Anycubic Photon ➜
https://amzn.to/33u5WcF
________________________________________________
Some Additional Items you will want to consider for Resin 3D Printing ➜
Resin - https://amzn.to/2GfHUcH
Disposable Gloves - https://amzn.to/2SqG7Uu
Plastic Spatula - https://amzn.to/30vuX5c
Metal Spatula - https://amzn.to/33tYUoc
Isopropyl (IPA) - https://amzn.to/3jyATlm
Pickle Container - https://amzn.to/3cX3fDv
Funnel - https://amzn.to/3isSLgo
Paint Filters - https://amzn.to/2HP3LI8
Lunch Tray - https://amzn.to/2Snt9a0
________________________________________________
Interested in getting a 3D Printer? Here are some that I use ➜
Ender 3 - https://amzn.to/3juXlfb
CR-10 - https://amzn.to/36vMyxL
____________________________________________
Gear I'm Using ➜
Sony Alpha a6400 - https://amzn.to/2HNNi70
Sigma 16mm f/1.4 - https://amzn.to/3cZnIaO
Batteries - https://amzn.to/3lcqpbP
Lighting - https://amzn.to/30w2Xi3
________________________________________________
Twitter ➜ https://twitter.com/3DPrintedProps
Instagram ➜ https://www.instagram.com/3dprintedpr...
Facebook ➜ https://www.facebook.com/3DPrintedProp/
YouTube ➜ https://www.youtube.com/3dprintedprops
____________________________________________
Thanks for watching!
#3DPrinting #3dResinPrinting #PeopolyPhenomL #Resin3dPrinting #finishing3dprints
Видео Finishing 3D Prints: How to Paint 3D Printed Parts канала 3D Printed Props
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Finishing 3D Prints: How to Sand, Fill and Prime 3D Printed Parts](https://i.ytimg.com/vi/ZTE9bJyUO_8/default.jpg)
![Finishing 3D Prints : Attaching Helmet Back Using Magnets](https://i.ytimg.com/vi/4a9nTbBrjrY/default.jpg)
![Painting the Superman: Call to Action PF | Sideshow Behind the Scenes](https://i.ytimg.com/vi/zWjuwZ0oM9g/default.jpg)
![How to paint dry flake / Painting method Metal flakes / Motorcycle painting・カスタムペイント](https://i.ytimg.com/vi/VzeOzGI7drY/default.jpg)
![How to turn a 3D PRINT into METAL │ Lost PLA Metal Casting │ ASMR](https://i.ytimg.com/vi/rYNTua5fXxY/default.jpg)
![Painting 3D Prints with Cheap Acrylic Paint // 3D Scanning, Printing,and Painting a Great WIDE Shark](https://i.ytimg.com/vi/5Kazrg5xAqY/default.jpg)
![How to Paint a Mandalorian Helmet - A Guide to Painting and Finishing](https://i.ytimg.com/vi/eiFH5-tfrF4/default.jpg)
![How to Paint Candy Metal Flake Panel Graphics](https://i.ytimg.com/vi/RPhr9EzyvdE/default.jpg)
![5 EASY ways to PAINT your 3D PRINTS!](https://i.ytimg.com/vi/NN1qAwLVKvA/default.jpg)
![Learning to Airbrush 3D Prints](https://i.ytimg.com/vi/1QwfwL3L4c0/default.jpg)
![Painting 3D Printed TMNT Raphael Bust | Start to Finish Time-Lapse | 3D Print n' Paint](https://i.ytimg.com/vi/O7A-Dn8EHZY/default.jpg)
![Red Hood Rebirth Cosplay Mask - 3D Printed Build Tutorial](https://i.ytimg.com/vi/G_5eDWzjyso/default.jpg)
![How To Get Metallic Finishes On 3D Prints](https://i.ytimg.com/vi/-UFRA_tYIpY/default.jpg)
![Improve your prints with acetone smoothing](https://i.ytimg.com/vi/NiG1jDEG0kA/default.jpg)
![The MANDALORIAN - 3Dprinting & Painting N’stuff](https://i.ytimg.com/vi/4mLBYk6do8w/default.jpg)
![How to spray chrome, new revolutionary chrome plating system rear door](https://i.ytimg.com/vi/Up_CLJXRyaM/default.jpg)
![5 Reasons NOT to 3D Print your Design](https://i.ytimg.com/vi/MaTusBKMRVY/default.jpg)
![How to Apply Weathering to Resin Props and Cosplay Armor](https://i.ytimg.com/vi/tQYs2Mjd2pI/default.jpg)
![How to smooth 3D prints with UV Resin (Step by step!)](https://i.ytimg.com/vi/9m__gsCjWGI/default.jpg)
![How to Paint 3D Resin Prints - Raven from Teen Titans](https://i.ytimg.com/vi/1cgaANsOnww/default.jpg)