ANYCUBIC MEGA ZERO - HEATED BED PART 2 - BED CONTROLLED BY THE STOCK BOARD IS WORKING!@!@!@!

Part 2 of my heated bed project for the Anycubic Mega Zero.

The printer is working with the stock control board managing the heated bed.
Links below have all the information in how I accomplished.

If you are considering adding a heated bed to your Anycubic Mega Zero, I would suggest watching all 3 videos in order. Including this video which is video #2. I have firmware, stl's notes and a readme file on thingiverse.

Video #1
https://youtu.be/sJeAniMir0c
Video # 1.1
https://youtu.be/EQJLe1VbFTg
Technical files, stl's, firmware and documents can be found on thingiverse. I will be uploading a few more files in a couple days so make sure to check back.

Link to thingiverse files - https://www.thingiverse.com/thing:4295816

Disclaimer:
My video is being shared as a demonstration and should be considered as for entertainment only. Any modifications you make to your own machine using information from this video shold be done at your own risk. Be prepared for the possibility of injury, damage to your machine or property, fire or even death whenever you modify a 3d printer.

I take no liability or responsibility for anything that may happen if you choose to modify your 3d printer.

Be smart and be safe.

Happy printing.

Видео ANYCUBIC MEGA ZERO - HEATED BED PART 2 - BED CONTROLLED BY THE STOCK BOARD IS WORKING!@!@!@! канала Adapted Machining