Learning IR remote control - Only 6 large keys buttons - the best for old people URC830B

Zon-Ter URC830B learning remote it is one of the best remote controls for old people. With just 6 large programmable keys it becomes easy to use.
Once it is programmed correctly it works awesomely. Just try to shoot the original IR signal inside where there is no Sun, otherwise it might not read the original IR signal correctly like it happened with the CH+ key in this video.

www.zonter.com.tw

UNIVERSAL FUNCTION SETTING
1, Manual Search
Hold on “MUTE” and “CH+” keys simultaneously. 5 seconds later, this remote control
unit (RCU) enters into universal setting mode. Then LED will light steadily .
Press CH+ or CH- for up or down search the code to match your TV. (Every press , LED
will flash once.)
Press both MUTE and CH- to exit universal setting.
Manual Search and Automatic Search can not be operated coinstantaneous.

2,Automatic Search
Hold on “MUTE” and “CH+” keys simultaneously. 5 seconds later, this remote control unit
(RCU) enters into universal setting mode. Then LED will light steadily .
Press CH+ or CH- for 3 seconds for up or down search. When the the matched code is found,
press any keys to stop search.
After check other keys, press CH+ or CH- for 3 seconds to automatic search.
Press both MUTE and CH- to exit universal setting.

LEARNING FUNCTION SETTING.
Hold MUTE and VOL+ for 5 seconds, then LED will turns strong light from weak light.
Turn the learned RCU directly at this RCU’s receiver. Their distance should be 1-3cm.
Press one key of learned RCU for 1-3s to send codes, LED of this remote control will turn to
flash from stable light. Then press key you desire to learn of this RCU to save the code inside.
If the code save sucessfully, LED will light stadily after three times flash.
Repeat set 2 and 3 to learn other keys
Press both “Mute” and “VOL-” to exit learning setting.

Видео Learning IR remote control - Only 6 large keys buttons - the best for old people URC830B канала arpcpro