How to fabricate Gasket using AFM ferolite NAM 37
PRODUCT DETAILS
Non Asbestos Gasket Jointing Sheets/Ferolite NAM 37
Ferolite NAM 37
Category: Non Asbestos Gasket Jointing Sheets
Applications:
Suitable for water/oil resistant gasket material for light to medium loading. Suitable for low operating pressure, e.g. transformers, compressors and also used for easily deformable components with low surface pressure like valve covers and pans in internal combustion engines.
Material Composition
(Type of fibres)
Aramid Fibre, Mineral Fiber .Binders
OPERATING CONDITION : Max.Peak Temp300°C
Max. Continuous Temp220°C
Max.Continuous Temp.with steam160°C
Max. Operating Pressure80 Kg/cm2
Видео How to fabricate Gasket using AFM ferolite NAM 37 канала Pulang Hantik
Non Asbestos Gasket Jointing Sheets/Ferolite NAM 37
Ferolite NAM 37
Category: Non Asbestos Gasket Jointing Sheets
Applications:
Suitable for water/oil resistant gasket material for light to medium loading. Suitable for low operating pressure, e.g. transformers, compressors and also used for easily deformable components with low surface pressure like valve covers and pans in internal combustion engines.
Material Composition
(Type of fibres)
Aramid Fibre, Mineral Fiber .Binders
OPERATING CONDITION : Max.Peak Temp300°C
Max. Continuous Temp220°C
Max.Continuous Temp.with steam160°C
Max. Operating Pressure80 Kg/cm2
Видео How to fabricate Gasket using AFM ferolite NAM 37 канала Pulang Hantik
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Box-up Plate Heat Exchanger
How to pull tube stubs by using puller machine (Retubing of U-tube type Heat exchangers)
How to calculate (BCD)Bolt Center Dimesion& fabricated Flange , Blind, at full Gasket.
How to install new Gasket for Plate Heat Exchanger
After Cooler tube expansion
Heat Exchanger retubing
The modern and the " most open" City in Saudi Arabia
HVAC condenser flushing using R11 to remove water inside the condenser unit
Tube End Facing of Inter Cooler
UNESCO WORLD HERITAGE SITE
#Aramco HE retubing work done...one unit for Stage Cooler.. Finally going back to Dammam....
A Visit to UNESCO WORLD HERITAGE SITE ( Old Al Balad Jeddah,K.S.A.)
Preparation and regasking Plate Heat Exchanger and installation of Plate
7th Birthday 🎉🎂🎉🎉 ng bunso Kung si Juan Carlos.
Drilling of Tube sheet hole
Vessel Tank Fabrication
Travel from Dammam to Jeddah
Forklift lifting heavy and huge Radiator
Pneumatic Test of Water- Chiller Cooler
Heat exchanger with helical tube... Nitrogen leak test.. 100 PSI pressure required.