Initial Setup and Tram of Precision Matthews PM-30MV CNC Mill
Here is the process I went through to get my PM-30MV dialed in and running true. A bit of a longer process, took me a little over a day but the down time was totally worth it. The mill is running better than ever.
A thanks to At-Man Unlimited for his series on setting up a mill which can be seen here: https://youtu.be/4HWuhbhySpw
Any question, post down below and I can go into more detail if someone is interested (or you could just watch the series above that I linked because he explains it REALLY well)
Видео Initial Setup and Tram of Precision Matthews PM-30MV CNC Mill канала MP Machining
A thanks to At-Man Unlimited for his series on setting up a mill which can be seen here: https://youtu.be/4HWuhbhySpw
Any question, post down below and I can go into more detail if someone is interested (or you could just watch the series above that I linked because he explains it REALLY well)
Видео Initial Setup and Tram of Precision Matthews PM-30MV CNC Mill канала MP Machining
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![The Best Mill Tip You Will Ever Get --WATCH THIS ENTIRE VIDEO--](https://i.ytimg.com/vi/ZghLslZZ6sg/default.jpg)
![Tramming a milling machine with epoxy](https://i.ytimg.com/vi/U7Qs-J2swIc/default.jpg)
![Hands-On: NEW Precision Matthews PM-728VT Precision Bench Mill](https://i.ytimg.com/vi/4_HeoKqUlx0/default.jpg)
![Setting up a New PM-940M Milling Machine - Unboxing, Moving and Assembly](https://i.ytimg.com/vi/CzANed8YQEQ/default.jpg)
![Shop Update #2 with PM-30MV CNC Mill Update.](https://i.ytimg.com/vi/U4Q_NjXsSZg/default.jpg)
![we got a new Mill! - S02E30](https://i.ytimg.com/vi/eMAhD7XVgFc/default.jpg)
![Precision Matthews lathe 2018 - reloaded](https://i.ytimg.com/vi/hYZNTn5PpYk/default.jpg)
![1mm stainless steel cutting with 50w fiber laser cutting machine](https://i.ytimg.com/vi/xDmlpxdWFxs/default.jpg)
![Milling Machine Alignment: Tramming the HEad and Vise to Square and Parallel](https://i.ytimg.com/vi/tU87cYRpyA8/default.jpg)
![PM30 Upgrades: Chapter 6 - Finally, some chips!!!!](https://i.ytimg.com/vi/xkaOKrseK0g/default.jpg)
![PM-25MV Milling Machine: Making Chips with Centroid Acorn and Fusion 360.](https://i.ytimg.com/vi/Criy420GB4o/default.jpg)
![Testing Lens Power on a 50W Fiber Laser](https://i.ytimg.com/vi/txsTMyJd3iE/default.jpg)
![Secrets to Machining an Aerospace Part on a Tormach CNC Mill](https://i.ytimg.com/vi/MD64fBUR980/default.jpg)
![Basic Lessons Learned with my Precision Matthews PM-25MV](https://i.ytimg.com/vi/At9dmfTRySA/default.jpg)
![Stock? Mill? Square!](https://i.ytimg.com/vi/tW8HNAlUXxU/default.jpg)
![3D coin engraving by 2.5D JPT 50W fiber laser engraving marking machine](https://i.ytimg.com/vi/ptK6eHAt9nk/default.jpg)
![Precision Matthews PM-949TV Milling Machine: Overview and Tour](https://i.ytimg.com/vi/gin9h2msAj4/default.jpg)
![Digital Readout! DRO! How to buy, install, and use 'em!](https://i.ytimg.com/vi/DZz8KlzJcEA/default.jpg)
![Precision Matthew Milling Machine Unloading and Setup (2018)](https://i.ytimg.com/vi/hjsRogS2I-o/default.jpg)
![Tramming Mill With Pro Tram](https://i.ytimg.com/vi/bJUc5-H4FoQ/default.jpg)