Maxx Performance (Not) Budget Barra Turbo EA - Episode 7
Welcome Episode 7 of our Maxx performance mini series !!
"We Recently found an EA "Gem" on Facebook marketplace for $800 and it turns out the owner also had a BTR & BF Gas motor for sale for $1100 Why not put the two together and send it.
With a Budget build in mind (as cheap as possible within reason)and trying to run a mid to low 10 down the 1/4 mile"
In this episode we finally get the car to the drag strip after some small setbacks.
We've also decided to stray away from the "budget" build, after having a catastrophic failure on the dyno we weren't keen on having that happen again in real life at 120mph.
Have you seen Scotty from the "street machine, carnage" Video about our broken tailshaft? check it out at - https://www.youtube.com/watch?v=6Qn1f...
With a Special thanks to
- Motul Fluids
- Plazmaman
- Race Coatings
- Rocket Industries
-PCMTec Tuning Software
- Phat Guard Rolling
- Bursons Dandenong South
- Amron Industries
- MTQ Dandenong
- Bill Hooton at Hooton' Toonton' Looms
- XR6 Turbo Developments
- Paul Rogers Performance Transmission
(Search our Facebook Page for more details!)
Видео Maxx Performance (Not) Budget Barra Turbo EA - Episode 7 канала Maxx Performance
"We Recently found an EA "Gem" on Facebook marketplace for $800 and it turns out the owner also had a BTR & BF Gas motor for sale for $1100 Why not put the two together and send it.
With a Budget build in mind (as cheap as possible within reason)and trying to run a mid to low 10 down the 1/4 mile"
In this episode we finally get the car to the drag strip after some small setbacks.
We've also decided to stray away from the "budget" build, after having a catastrophic failure on the dyno we weren't keen on having that happen again in real life at 120mph.
Have you seen Scotty from the "street machine, carnage" Video about our broken tailshaft? check it out at - https://www.youtube.com/watch?v=6Qn1f...
With a Special thanks to
- Motul Fluids
- Plazmaman
- Race Coatings
- Rocket Industries
-PCMTec Tuning Software
- Phat Guard Rolling
- Bursons Dandenong South
- Amron Industries
- MTQ Dandenong
- Bill Hooton at Hooton' Toonton' Looms
- XR6 Turbo Developments
- Paul Rogers Performance Transmission
(Search our Facebook Page for more details!)
Видео Maxx Performance (Not) Budget Barra Turbo EA - Episode 7 канала Maxx Performance
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Nugget Garage - 13's for $1300, We TURBO the N/A BARRA and SEND it!Maxx Performance EA Falcon SOHC CFI Part - 1NOMANG hits the track (and the dyno...again) - Barra powered Holden Ep13 | fullBOOSTThe Australian Barra Engine* Why I Love It!Maxx Performance 700rwkw FGX XR6 Turbo [SLOFGX]Drifting a 600HP Turbo Falcon - Powercruise 2019Maxx Performance Budget Barra Turbo EA - Episode 4!!Maxx Performance GR Yaris 0-100kph in 4.52 seconds!How to build a 7-second street Ford Barra | fullBOOSTBF N/A XR6 Gets a TurboDyno Tuning an NA BARRA - Is It Worth It? | Basic Barra Performance Mods Pt 8Maxx Performance Budget Barra Turbo EA - Episode 1Modified NA Barra Goes Back To the Track! [Series Finale] | Basic Barra Performance Mods Pt 9Breaking Barra hearts with 1 camshaft | fullBOOSTTurbo AU Falcon vs Powercruise🏅 Benny's Barra-swapped, 1200hp, 8sec Mustang | HALTECH HEROESWe finally bought a Barra! But what to do with it? - Day Job Episode 1AUSTRALIA'S BEST FORD TE CORTINA V8 [Build Review] WHAT'S IN THE BARN? | Street Car CultureFull SEND in Kevin the Sicko Turbo V6!!Pushing our STOCK N/A Barra with MORE BOOST!!